Chuck,
There is a series of articles on soldering as a blind tech at:
http://www-test.ski.org/Rehab/sktf/index.html
look for "The Soldering Series"
Although a bit old, the techniques are valid for through hole devices etc.
There is no method I know of for a bat to handle surface mount devices.
I would strongly not reccommend anybody mess with soldering directly to the
raspberrypi board, much to sensative and tight. I've been soldering for
years and I'd not try it.
But switches, connectors components with leads, through hole chips and so on
can be done with practice.
It's even fun!
Please ask more if needed.
regards
Tom Fowle WA;6IVG
On Sat, Aug 19, 2017 at 05:51:19PM -0500, chuck winstead wrote:
Hello everyone,===========================================================
I was looking at a project I was wanting to try out, and it calls for a
little bit of soldering. Does anyone have any suggestions on soldering? I
have no usable eye sight. I mean I can see lights, motion, and colors
depending on distance. I just don???t have usable eye sight.
What would you guys recommend?
Chuck===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
