Here is the part from one of the braille sells that I have been playing with.
This was similar to the bp18 kgs cells.
"circuit is powered up by a 12V DC adapter. A DC-to-DC
converter is used to convert the 12V input voltage to 200V
output voltage that is used to activate the piezoelectric
"
So you would have to build a circuit to do that or buy one either way you would
have to know how to connect everything up for the power. Controlling the pins
is simple though.
Ken
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx> On
Behalf Of Pranav Lal
Sent: Thursday, December 31, 2020 11:20 PM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: Can I build my own Braille display that is driven
by the pi?
Hi Ken,
Many thanks. Can't the pi do the processing and drive the cells instead of
having a dedicated board?
Pranav
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of the
Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of the
Foundation.
Mike Ray, list creator, January 2013
