Parden me for butting in, but does rasbion running on a pi or a full size
machine?
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx> On
Behalf Of Pranav Lal
Sent: Friday, January 22, 2021 11:51 PM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: How do I install speakup
Hi Ken,
Do you get speech if you do
Spd-say "hello"
I had this problem with Raspbian and the only way around was to disable hdmi.
Setting the audio output to headphones did not work or rather, it worked only
once.
Pranav
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx> On
Behalf Of kperry@xxxxxxxxxxxxx
Sent: Saturday, January 23, 2021 10:36 AM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: How do I install speakup
It is already running if you use the newest rasbion. My problem is I have
checked all you mention and the two services are running. I have even tried to
restart them and still get no speech out. According to the post about the
December rasbion speakup should work out of the box I guess I can just
uninstall it all and see if I can start over and get it running. I was trying
to figure out why the default rasbion is not working even though the espeak is
working and the two services are running.
Ken
Ken
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx> On
Behalf Of Michael A Ray (Redacted sender "mike.ray" for DMARC)
Sent: Friday, January 22, 2021 10:20 PM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: How do I install speakup
Hello Pranav,
Try this:
sudo modprobe speakup_soft
That should load two modules:
speakup_soft
And:
speakup
The first depends on the second, so the second will get automatically loaded at
the same time.
Do this at any time:
lsmod | grep speakup
And if you get results, then the modules are already loaded.
To get speakup_soft to load at boot-time, create the file:
/etc/modules-load.d/speakup.conf
And put this line in it:
speakup_soft
I usually put a blank line or two before and after.
Then when the module is loaded, you can:
sudo apt-get install espeakup
And assuming you have libespeak-dev installed, then you should get speech.
Mike
On 23/01/2021 03:05, Pranav Lal wrote:
Hi Ken and all,
How do I install speakup on the raspberry pi? I cannot tell if it has
been compiled into the kernel. I need some steps to start with and
then I can see what happens.
Pranav
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
