[sib-access] Found Missing Documentation was RE: Re: Cannot Access Mixer Mode

From: "Dani L Pagador" <axs.brl@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Date: Fri, 28 Jun 2013 19:43:49 -1000

Hi, Everyone.
I was looking through the Sib5 zip folder on the off chance that there was
documentation I wasn't reading, and ... of course there was. *sigh*

When I bring up the Sib Access options and choose the SAG, twelve links come
up under the table of contents.

Thanks for helping with my baby steps,
Dani, thinking she might need to reinstall scripts in case something may be
missing ...
When I looked at what's in the .zip folder, I found the Mixer documentation
the list archives refer to. I'll go read it now and try what's there out. 

   

-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar Carlson
Sent: Friday, June 28, 2013 3:21 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: Cannot Access Mixer Mode

Your properties window may not be opening. You need to look at the
documentation where it describes how to ensure that the keypad and
properties windows are checked in the window menu.

If you're reading the milestone.doc file you may be looking at older
documentation. The more recent Sib-Access documentation is in html format
and broken out into specific files. Should be accessible via the Alt+F1
keystroke in Sibelius. Sorry I'm not sitting at that computer and cannot
work on it right now.


Dave Carlson
From my Laptop
----- Original Message -----
From: "Dani L Pagador" <axs.brl@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Friday, June 28, 2013 5:30 AM
Subject: [sib-access] Cannot Access Mixer Mode


Hi, Everyone.
I looked through the Milestone1 doc and am trying to use the Ctrl+m key
combo to access the mixer mode. It doesn't seem to do anything, and pressing
any key to exit mixer mode doesn't result in the "exiting mixer mode"
message that is supposed to happen; also, the mixer window doesn't open as
it should when the mixer mode shortcut is used.



Is there a fix for this? I really need to get to the window and be able to
work with it to finish my final project, so am hoping someone can clue me
in.

Thanks,

Dani





If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx 

If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

[sib-access] Found Missing Documentation was RE: Re: Cannot Access Mixer Mode

Other related posts: