[wdmaudiodev] Re: HLK Unexplained Failures

  • From: "Matthew van Eerde" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "Matthew.van.Eerde" for DMARC)
  • To: "wdmaudiodev@xxxxxxxxxxxxx" <wdmaudiodev@xxxxxxxxxxxxx>
  • Date: Mon, 10 Jun 2019 18:19:01 +0000

Quoting my previous response:


  *   Right-click “Run Test” and choose “Error” from the submenu

________________________________
From: wdmaudiodev-bounce@xxxxxxxxxxxxx <wdmaudiodev-bounce@xxxxxxxxxxxxx> on 
behalf of Michael Johansen <johansen.mic@xxxxxxxxx>
Sent: Monday, June 10, 2019 11:17:08 AM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Re: HLK Unexplained Failures

And what if the test has a big red X on it but the log says 0 Fail, and it then 
passes on next run?

Den man. 10. jun. 2019 kl. 20.14 skrev Matthew van Eerde 
<dmarc-noreply@xxxxxxxxxxxxx<mailto:dmarc-noreply@xxxxxxxxxxxxx>>:
The test failure indicates that there’s a bug in your driver, or in the OS, or 
in the HLK.

If the test failures intermittently, that indicates that there’s an 
intermittent bug in your driver, or in the OS, or in the HLK.

If the bug is in the OS or the HLK, Microsoft should fix it, or at least errata 
it.

If the bug is in your driver, you should fix it.

So I still recommend debugging the issue even if you can get the test to pass 
eventually by rerunning it a lot.

________________________________
From: wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx> 
<wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx>> on 
behalf of Michael Johansen 
<johansen.mic@xxxxxxxxx<mailto:johansen.mic@xxxxxxxxx>>
Sent: Monday, June 10, 2019 11:08:23 AM
To: wdmaudiodev@xxxxxxxxxxxxx<mailto:wdmaudiodev@xxxxxxxxxxxxx>
Subject: [wdmaudiodev] Re: HLK Unexplained Failures

Just run failed DF tests until they pass or you get a log with an error you 
actually use.

My last run had 3 failed DF tests. Ran them again and they passed.
HLK is still quite full of bugs in my opinion.

BR

Michael

Den man. 10. jun. 2019 kl. 19.06 skrev David A. Hoatson 
<dhoatson@xxxxxxxxxxxxxx<mailto:dhoatson@xxxxxxxxxxxxxx>>:
OK, the test computer never stopped working (it never crashed or hung).  How 
would I go about debugging this?

Thank you,

David A. Hoatson
Lynx Studio Technology, Inc.
www.lynxstudio.com<http://www.lynxstudio.com/>

From: wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx> 
[mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx>]
 On Behalf Of Matthew van Eerde (Redacted sender "Matthew.van.Eerde" for DMARC)
Sent: Monday, June 10, 2019 9:35 AM
To: wdmaudiodev@xxxxxxxxxxxxx<mailto:wdmaudiodev@xxxxxxxxxxxxx>
Subject: [wdmaudiodev] Re: HLK Unexplained Failures

This particular failure is because the test took longer than it was supposed 
to. Right-click “Run Test” and choose “Error” from the submenu:

[cid:16b429adcbd5b16b21]

Cause : INFORMATION: Task "Run Test" Failed Because the Task With TaskTimeout 
Flag Was running after the Timeout period 9000000 MilliSeconds

Cause : The Execute Task with Commandline cmd /c TE.exe /enablewttlogging 
/appendwttlogging devfund_sleep_with_io_during_wlk_certification.dll 
/name:Sleep_With_IO_During::Sleep_With_IO_During_Test#* 
/p:"DQ=(HardwareIds='PCI\VEN_1621&DEV_0034&SUBSYS_00341621&REV_00' OR 
DeviceId='PCI\VEN_1621&DEV_0034&SUBSYS_00341621&REV_00\4&2F184804&0&0018')" 
/p:"Wpa2PskAesSsid=kitstestssid" /p:"Wpa2PskPassword=password" 
/p:"TestCycles=4" /p:"ResumeDelay=10" /p:"IOPeriod=1" 
/p:"MultiDeviceHardwareIdSdelQueryHardwareID=HardwareIds='PCI\VEN_1621&DEV_0034&SUBSYS_00341621&REV_00'"
 
/p:"MultiDeviceInstanceIdSdelWDKDeviceID=DeviceId='PCI\VEN_1621&DEV_0034&SUBSYS_00341621&REV_00\4&2F184804&0&0018'"
 /p:"WDTFREMOTESYSTEM=" /p:"DriverVerifierAdditionalDrivers=MSDMFilt.sys" 
/p:"DriverVerifierExcludedFlags=0x0" 
/p:"DriverVerifierCustomizeConfiguration=True" Failed with ExitCode 8201adaf

It’s probably hung.

________________________________
From: wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx> 
<wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx>> on 
behalf of David A. Hoatson 
<dhoatson@xxxxxxxxxxxxxx<mailto:dhoatson@xxxxxxxxxxxxxx>>
Sent: Monday, June 10, 2019 9:17:26 AM
To: wdmaudiodev@xxxxxxxxxxxxx<mailto:wdmaudiodev@xxxxxxxxxxxxx>
Subject: [wdmaudiodev] Re: HLK Unexplained Failures

Emailed you the link.

Thank you,

David A. Hoatson
Lynx Studio Technology, Inc.
www.lynxstudio.com<https://nam06.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.lynxstudio.com%2F&data=02%7C01%7Cmatthew.van.eerde%40microsoft.com%7Ccdd8cc88e634442a64bc08d6edcff7d4%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C636957874853741111&sdata=hdnxhmXQ5POr%2B4JKOsqhmsE7D3AWWzLJuXuTIzNmsM8%3D&reserved=0>

From: wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx> 
[mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of Matthew van Eerde ;
(Redacted sender "Matthew.van.Eerde" for DMARC)
Sent: Monday, June 10, 2019 8:46 AM
To: wdmaudiodev@xxxxxxxxxxxxx<mailto:wdmaudiodev@xxxxxxxxxxxxx>
Subject: [wdmaudiodev] Re: HLK Unexplained Failures

Can you share the .hlkx?

________________________________
From: wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx> 
<wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx>> on 
behalf of David A. Hoatson 
<dhoatson@xxxxxxxxxxxxxx<mailto:dhoatson@xxxxxxxxxxxxxx>>
Sent: Monday, June 10, 2019 8:07:43 AM
To: wdmaudiodev@xxxxxxxxxxxxx<mailto:wdmaudiodev@xxxxxxxxxxxxx>
Subject: [wdmaudiodev] HLK Unexplained Failures

OK, here is another one for Matthew…

Nearly all of the “DF” tests are failing on the HLK tests, but when I look at 
the log files it says the test passed so there is nothing for me to fix. This 
seems to be a bug in the HLK that is pretty basic.  I have applied the latest 
filters.  The other clue here is the test says it will take 5 minutes and it 
takes several hours.  I’m 4 days into running the full suite of tests and still 
have not gotten through them all.  Something is fundamentally wrong but it 
isn’t obvious what it might be.

Thank you,

David A. Hoatson
[cid:16b429adcbd692e332]

PNG image

PNG image

Other related posts:

  1. Home
  2. wdmaudiodev
  3. Archive
  4. 06-2019