[wdmaudiodev] Re: Max Number of Channels of a HDMI device
- From: Matthew van Eerde <Matthew.van.Eerde@xxxxxxxxxxxxx>
- To: "wdmaudiodev@xxxxxxxxxxxxx" <wdmaudiodev@xxxxxxxxxxxxx>
- Date: Fri, 28 Dec 2012 16:39:53 +0000
(After browsing some code...)
What are the min/max bit depths and min/max sample rates for this particular
8-channel HDMI device? In particular, does the device support 32 kHz 16-bit
formats?
-----Original Message-----
From: wdmaudiodev-bounce@xxxxxxxxxxxxx
[mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Pages
Sent: Thursday, December 27, 2012 7:42 PM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Re: Max Number of Channels of a HDMI device
For a render device, I'm pretty sure you also need to support
KSPROPERTY_AUDIO_CHANNEL_CONFIG and KSPROPERTY_AUDIO_STEREO_SPEAKER_GEOMETRY
on your DAC node.
Jeff
From: JimiYeh@xxxxxxxxxx
Sent: Friday, December 28, 2012 1:06 PM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Re: Max Number of Channels of a HDMI device
I have overrided the default data intersection handler. I can output 8 channel
PCM actually.
But I don’t know why “Max Number of Channels” is always 2.
From: wdmaudiodev-bounce@xxxxxxxxxxxxx
[mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of Matthew van Eerde
Sent: Friday, December 28, 2012 12:43 AM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Re: Max Number of Channels of a HDMI device
Since you support more than two channels, you also need to override the
default data intersection handler.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff536252(v=vs.85).aspx
The current implementation of the port driver's default handler is limited
in the types of data ranges that it can handle:
· Only PCM data formats
· Only mono and stereo audio streams
An adapter driver that supports non-PCM or multichannel formats should
implement a proprietary data-intersection handler instead of relying on the
port driver to handle data intersections for these formats.
From: wdmaudiodev-bounce@xxxxxxxxxxxxx
[mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of JimiYeh@xxxxxxxxxx
Sent: Wednesday, December 26, 2012 11:55 PM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Max Number of Channels of a HDMI device
Hi all,
I am trying to write a WaveRT driver for HDMI on window7. I need to
report my data range according to the HDMI sink device
(Ex: monitor, amplifier, …). When I attached the amplifier which can support
8 channel, The control panel will show the information
about the amplifier. I can see the correct sample size range, frequency
range except “Max number of Channels”. “Max Number of Channels”
is 2. I have checked my data range in my code. I’m sure I set the
MaximumChannels is 8.
if(myELD->GetFormatSupport(LPCM))
{
DataRangeAudio[LPCM].DataRange.FormatSize =
sizeof(KSDATARANGE_AUDIO);
DataRangeAudio[LPCM].DataRange.Flags = 0;
DataRangeAudio[LPCM].DataRange.SampleSize = 0;
DataRangeAudio[LPCM].DataRange.Reserved = 0;
DataRangeAudio[LPCM].DataRange.MajorFormat =
KSDATAFORMAT_TYPE_AUDIO;
DataRangeAudio[LPCM].DataRange.SubFormat =
KSDATAFORMAT_SUBTYPE_PCM;
DataRangeAudio[LPCM].DataRange.Specifier =
KSDATAFORMAT_SPECIFIER_WAVEFORMATEX;
DataRangeAudio[LPCM].MaximumChannels =
myELD->GetFormatMaxChannel(LPCM);
DOUT(DBGJimi, ("Max Channel : %d",
DataRangeAudio[LPCM].MaximumChannels)); // the debug message is 8
DataRangeAudio[LPCM].MinimumBitsPerSample =
myELD->GetFormatMinBitDepth(LPCM);
DataRangeAudio[LPCM].MaximumBitsPerSample =
myELD->GetFormatMaxBitDepth(LPCM);
DataRangeAudio[LPCM].MinimumSampleFrequency =
myELD->GetFormatMinFrequency(LPCM);
DOUT(DBGJimi, ("Min rate : %d",
DataRangeAudio[LPCM].MinimumSampleFrequency));
DataRangeAudio[LPCM].MaximumSampleFrequency =
myELD->GetFormatMaxFrequency(LPCM);
DOUT(DBGJimi, ("Max rate : %d",
DataRangeAudio[LPCM].MaximumSampleFrequency));
pKsDataRange[DataRangeIndex] =
reinterpret_cast<KSDATARANGE*>(&DataRangeAudio[LPCM]);
DataRangeIndex++;
}
Thank you.
Best Regards,
Jimi
******************
WDMAUDIODEV addresses:
Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx
Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe
Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe
Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx
URL to WDMAUDIODEV page:
http://www.wdmaudiodev.com/
X3P2 EZu�Ǭ>�-��,j�j)m�fj�b�ׯ~���+-���J��r��zf���0vf�v* z�ު笵��zX���+�˛��-
Other related posts:
