[bksvol-discuss] Re: K1000 and RTF Files
- From: "Pratik patel" <pratikp1@xxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Fri, 16 Jun 2006 19:53:11 -0400
Jake,
The circuutous route that will let you see the ignored words is to have the
file saved to RTF and reopened into K1K. The saved ignored word information
disappears and you'll be able to go back to the rank spelling or spell check
to see the ignored words. As Stephen mentioned on this list several days
ago, the best option is to work with the .kes file for as long as you can
before converting it to RTF or another format. In fact, I usually make it a
point to convert RTF files taken from Bookshare to validate into .kes format
and reconvert them when uploading back to bookshare.
Pratik
Pratik Patel
Director, CUNY Assistive technology Services (CATS)
The City University of New York
pratikp1@xxxxxxxxx
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Jake Brownell
Sent: Friday, June 16, 2006 7:36 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: K1000 and RTF Files
Hi E,
In version 10, this is also accessible via the properties dialogue of
Rank Spelling. Personally I tend not to ignore capitalized words, but then
my usual scanning is childrens lit, so there's not as great of a need.
KES files in version 10 will also retain words that you have ignored through
rank spelling. This makes it possible to do rank spelling in more than one
sitting. Handy feature, although I don't know a way of being able to see
what words you have ignored at a later time.
Jake
----- Original Message -----
From: "E." <thoth93@xxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Friday, June 16, 2006 6:32 PM
Subject: [bksvol-discuss] Re: K1000 and RTF Files
> UYou can open a rtf in k1000 just as you would any other file. You can
> use the apply corrections choice and the rank spelling choice on any rtf
> files.
> Those choices are found under the tools option.
>
> Remember to do one thing before you use rank spelling. Go to spell
> checker and make sure the k1000 ignors capitalized words. Once you change
> that setting, rank spelling will also ignore capitalized words which will
> cut down a lot on words rank spelling does not recognize.
>
> Keep asking questions. Great program. Glad you have the demo.
>
> E.
>
>
> At 07:15 PM 6/16/2006, you wrote:
>
>>Hi. I now have a 30-day demo of K1000. I've been playing with it all day
>>and have a question. Actually, I have a ton of questions, but this is the
>>important one. Can I edit an rtf file inside of k1000? If so, do I need
>>to do some sort of save as or convert process when saving the edited file?
>>I'm under the impression that K1000 converts the rtf to a kes format while
>>I edit it. Any help would be greatly appreciated.
>>
>>
>>Monica
>>Visit my blog at: http://plumlipstick.livejournal.com
>>
>>To unsubscribe from this list send a blank Email to
>>bksvol-discuss-request@xxxxxxxxxxxxx
>>put the word 'unsubscribe' by itself in the subject line. To get a list
>>of available commands, put the word 'help' by itself in the subject line.
>>
>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line. To get a list
> of available commands, put the word 'help' by itself in the subject line.
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.0/367 - Release Date: 6/16/2006
>
>
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
