[ddots-l] Re: 48 versus 44.1 for recording
- From: Dominique <40493raywonder@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx, ddots-l@xxxxxxxxxxxxx
- Date: Wed, 30 Mar 2011 07:15:21 -0500
is Sound Forge accessible?
Do you need Scripts?
How can I get it?
Dominique:
Site admin of
Muztech Community:
website
http://muztechcommunity.com
Twitter:
http://twitter.com/muztech_online
----- Original Message -----
From: Jack Conti <jackconti@xxxxxxx
To: ddots-l@xxxxxxxxxxxxx
Date sent: Wed, 30 Mar 2011 07:46:31 -0400
Subject: [ddots-l] Re: 48 versus 44.1 for recording
oops Chris is it in the export dialog? is that what you are
driving at?
At 05:01 PM 3/25/2011, you wrote:
At 04:45 PM 3/25/2011, Phil wrote:
You would then record the output from the PC running the 48
project
to the PC running the 44.1 using analogue outputs in real-time to
a
stereo wave file.
Wow, you prefer this method to using a sample rate converter like
that found in Sonar or the iZotope SRC with newer versions of
Sound
Forge? The ADC and DAC in both PC's had better be high quality,
not
to mention the analog circuitry in both audio interfaces had
better
be quiet, or you're degrading things just by doing things in
analog
- possibly adding jitter and increasing the noise floor. Not to
mention, you have to do this in real time.
Personally, I load the file into Sound forge, go into iZotope
64-bit
SRC, and bump it's quality setting up to 100. If you don't want
to
bother adjusting all the parameters available, check the box that
says Use Simplified Interface, and then just set the sampling
rate
and quality setting. If converting like that is adding aliasing
or
other artifacts, I definitely can't hear them.
Chris
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
