As Jean said, you can get into the Sonitus EQ from within the Track Inspector. Also, for any of you who are using my HSC sets for this, the good news is that I have set them up so that they will function whether you use the EQ in the Inspector view or, in the affects bin of a track. Finally, remember that if you use the EQ in the inspector then, when focused over the EQ, you may want to press the applications key and choose post affects, from the menu. That is, if you for example, have a compressor on the same track, and you wish the EQ to come after that. Regards, Phil Muir P J Muir Productions Music And Audio Production URL: www.philmuir.com/ Band website: www.steelstringmusic.co.uk/ Band my Space Site: www.myspace.com/steelstringmusic ----- Original Message ----- From: "Tim Burgess" <tim@xxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, October 06, 2007 5:28 PM Subject: [ddots-l] Re: 6 band eqs Herman, This is a limitation of the Track Inspector - it will only show you bands 1 through 4 and there doesn't seem to be a way of bring up the interface for the plug-in itself. The plug-in being used for the track EQ is, in fact, the Sonitus EQ so there's a work-around for any tracks that you want to use more than 4 bands on: 1 - Put the Sonitus EQ into the FX bin of the track you want to manipulate; 2 - Press Enter on the Sonitus EQ instance within the FX Bin and you'll pull up the plug-in interface and you'll be up and running. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of HF Sent: 06 October 2007 17:00 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: 6 band eqs Plot function checked and EQ on but I only see options for 4 bands. Also from the inspector, how do you access the EQ plugin? HF ----- Original Message ----- From: "Jörgen Hansson" <hansson.jogge@xxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, October 06, 2007 11:45 AM Subject: [ddots-l] Re: 6 band eqs > Hi Herman! > this is Jorgen. > I know exactly what you're talking about here. > to access the 6 band EQ you can either instert the eq from the FX bin on > that particular track you would like to have it on, or when you are in the > inspector pain on that track you can check if you have the plot funcion > checked in the display menu. if you have that, you can press the EQ graph > button. > hope this helps > > Jorgen! > ----- Original Message ----- > From: "HF" <hermanfermin@xxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Saturday, October 06, 2007 12:49 AM > Subject: [ddots-l] 6 band eqs > > >> How do you turn on all of the 6 bands of the EQ's in Sonar 6. I can see >> the 4 bands but I understand that there are 6 of them. Where are they? >> >> >> HF >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** ddots-l-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> Subject:- faq >> >> > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq