[ddots-l] AW: Re: Hardware / Soundcard problem pls. help!
- From: "Patrick Schuppe" <p.schuppe@xxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 22 Jun 2006 13:31:41 +0200
Hi to all again,
I have had great help from an hardware techy today. We have done everything
we could to bring this thing to work. The card never showed up in the
system. Not in the Sound, audio, hardware or in the system. The installation
program said also that there is no supported hardware found. So I think that
the card is damaged. I contacted the dealer and I can send the card back and
hopefully I can get 1 or 2 M-Audio DELTA 1010LT cards for this.
I also thought of disabling the Onboard soundcard complitly and get an low
end soundblaster card. the only problem will be that there may be not enough
slots in the PC avalible for that.
But then I will look for an usb-card or simply connect an USB-Head set to
hear jaws. So I should be in great shape when I can manage to get the
M-Audio DELTA 1010LT cards. If not then I have to work with the Emu again.
I also thought of an IRQ-problem with the realtek card but do not know how
to fix it. It is onboard so I only can disable it and re-move the drivers if
I realy need and use 2 other cards.
Thanks for the great help again. I hope that I can manage to get the other
cards.
Best regards,
Patrick Schuppe
-----Ursprüngliche Nachricht-----
Von: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]Im Auftrag von Kylee Maloney
Gesendet: Donnerstag, 22. Juni 2006 08:20
An: ddots-l@xxxxxxxxxxxxx
Betreff: [ddots-l] Re: Hardware / Soundcard problem pls. help!
Hi, Patrick
I think that someone has to enable the onboard sound card from the bios
level. Not sure what that means, but technicians seem to know what that's
all about, and I'm sure someone far more knowledgeable than I could explain
it far better.
HTH
Kylee
----- Original Message -----
From: "Patrick Schuppe" <p.schuppe@xxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, June 22, 2006 5:11 PM
Subject: [ddots-l] Hardware / Soundcard problem pls. help!
> Hello all together,
>
> I have an very technical problem here. I think that may be noone can help
me
> here but because I think that everyone who can not order an accessible
> dancingdots workstation for what ever reson may run into that same
problem.
> That's why I post this and hopefuly to get an solution.
>
> The wole problem is about adding an sekend soundcard to the system I mean
an
> highend soundcard for Music produktion for Sonar.
>
> Please also see an description of Hardware used in my system below.
>
> I have 2 Soundcards here that I need to use. The lo end card is an
"Realtek
> AC.97 Audio"onboard soundcard. The 2th is an Emu 18 20 M. Both cards have
> been installed by my dealer but onestly I do not think if he has checked
the
> highend card if it works proberly. So I got the system; installed Jaws and
> in the controlpanel there is only showing the Realtek soundcard and not
the
> Emu 18 20 M.
>
> What I found out after talking with a lot support people is that Windows
is
> not supporting multiply Soundcards. But I know that there must be a way
> because the Dancingdots systems have 2. I need this 2 cards because one
for
> Jaws talking output and the other for the music thinks. So the first
> question is how that works that I can have this 2 cards working?
>
> Do I need an other highend soundcard as the Emu?
>
> By talking to a few support people here in Germany I also found out that
the
> Onboard soundcard can not run with an 2th sound card. I do not know if
this
> is true but it has given me an other idear here: What if I disable the
> Onboard sound in the Bios and after that install the Emu card again and
for
> the Jaws talking I connect an USB-head set that I have here. That may be
the
> solution I think. What do you all think and know about such solutions and
> problems? I think everyone runs into that same problem because we all need
> an 2th sound card for the Jaws talking.
>
> I need your help / comments / suggestions and if an technical person reads
> this then an technical atvice please:-)
>
>
>
> Here is my Soft and hardware configuration:
>
>
>
> Prozessor:
>
> Intel Pentium-D 930
>
> Ram:
>
> 1 module RAM DDR2 533 1024MB Aeneon
>
> Mainboard:
>
> Asus P5ND2-SLI Revision 1.03
>
> Grafik:
>
> XFX Geforce 6200 128MB PCI-Express
>
> Onboard Soundcard: Realtek AC.97 Audio
>
> Hard drive:
>
> Samsung SP0822N 80GB 7200 U/min IDE
>
> Cd/DVD Player / burner:
>
> DVD RW burner Philips SPD2400L1
>
> Highend soundcard: Emu 18 20 M
>
> Box to change hard drives:
>
> ICY Dock IB-128SK-B SATA
>
> Tower:
>
> Delux MG420
>
> Kayboard:
>
> Cherry G81-3000LPNEU-D Layout
>
> Software:
>
> Microsoft Windows XP Professional
>
> Including service pack 2, Multilanguage-Edition
>
>
>
> Jaws 7.0
>
> Sonar 5.0
>
> Caketalking scripts for Sonar 5.0 (CT5.0.16)
>
>
>
> Ofcorse because the Soundcards are not working probperly I have not
> installed any components of Sonar or Caketalking yet.
>
> I hope this mailing helps other blind people as well.
>
>
>
> Best regards from Germany,
>
> Patrick Schuppe
>
> Germany
>
----------------------------------------------------------------------------
----
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.2/370 - Release Date: 20/06/2006
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
