Andre, thanks for all the suggestions and will definitely try all of
them. Am thinking a good chance is the xlr cable so have a few to try.
Am definitely not hearing this sound when using line in from my guitar
so now am thinking either the mic or cable going in. I'm also trying all
the different usb ports in event that one works better over the others.
Thanks again, Dave
On 6/23/2016 11:28 PM, Andre Jarreau wrote:
Guys, some thoughts.
If you have a two pronged plug. Try pulling it out flipping it over and
plugging it back in. This reverses the chassy ground and might help.
Also try another microphone. The mic could be going bad. Switch to a regular
diaphragm mic that does not require phantom power. If hum goes away then It's
may be a bad mic or possibly phantom power circuitry related, or both. Any
circuitry should be looked at by a professional. Bring it to a pro or exchange
it if it's new.
Another thing you can try is simply clean the USB plug and port with denatured
alcohol and a cotton swab. Swab the port gently, you don't want to leave any
fibers behind. While USB plug is still damp with alcohol plug in and out
several times quickly to assist cleaning metal contact connections.
Last; fingerprint oils and many contaminents human hands come in contact with
are transmitted to the USB plug and on to the port if you touch the metal
contacts of the USB plug at all with your bare hand. Never touch the metal
contacts!!!
Hope this helps.
Andre.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Chi Kim
Sent: Thursday, June 23, 2016 8:41 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Accessibility Review for Focusrite Scarlett 2i2 Second
Generation
Hi Dave,
Like you said, it could be a grounding issue.
If you have a access to a laptop, use the audio interface with the
laptop running on battery without power.
Then don't plug in anything into the audio interface except microphone,
and listen with a headphone instead of speaker. If the hum goes away,
then it's most likely a electrical problem.
Chi
On 6/23/2016 6:57 PM, Dave Hillebrandt wrote:
Hello Chi, I've also found this interface to work very well and with<�
sonar, you have access to more adjustments. However, I am experiencing
a problem as of late and wonder if you or anyone else has ideas what
it could be. This is ran through usb and when listening to the monitor
and using a mic with fantom power, I am hearing a low frequency motor
boat type sound on occasion. Not sure if its the computer, the Scarlet
or what. Doesn't always happen when fresh reboot and most of the time
its in there. Decided to try different usb ports yesterday and didn't
notice any real difference. suppose it could be in the power supply of
the computer. Any experience with this. otherwise, a great little
product and like it much better than the M-audio that I used and was
totally inaccessible. Like the knobs and switches. Dave
On 6/23/2016 3:53 PM, Chi Kim wrote:
Hi All,PLEASE READ THIS FOOTER AT LEAST ONCE!
Sorry for the cross posting, but I'm sure it'd be useful information for
people looking for a new audio interface.
I just bought a Scarlett 2i2 second generation, and played for a day. I
wanted to let you know what to expect in terms of accessibility. Let's
go from good news to bad news.
The hardware is 100% accessible. Everything is switches, knobs, and a
button.
On Mac side, there's nothing to install, it works out of the box.
There's an optional low latency driver. Even if you install the optional
driver, there's no software for control panel.
You set latency and sampling rate in your DAW. This is no problem if you
use Pro Tools and Logic, but if you use software that doesn't let you
adjust latency, this might be a problem. One example would be the latest
Garageband.
I might have missed, but I couldn't find where you can adjust the
latency outside DAW. I didn't see anything about it in the manual
either. This should be a problem for everyone, not just VI users.
On Windows, you have to install their driver, and unfortunately the Asio
panel is not accessible. Screen reader reads only minimize and maximize,
not even the title. I haven't tested, but this might not be a problem if
you use wdm or Asio4All.
If you need an affordable, simple, secondary audio interface, it fits
the bill. There you go.
Chi
<�
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
