thank you much sir, just wanted to check. i checked my settings and it never cried <grin>
At 10:03 AM 5/3/2011, you wrote:
The horizontal resolution isn't so important. If you have a widescreen display, you'll be fine with 1280X768. The vertical resolution, though, must be 768.Bryan -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Jack ContiSent: Monday, May 02, 2011 12:52 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Browse button in dimension ProBryan does this mean for the screen resolution has to be 1024 over 768, and i believe those numbers and right, or has this change a little in other words is there any leeway?At 09:51 AM 5/2/2011, you wrote: >HSC isn't necessary for Dimension Pro if she has a fairly recent >version of CakeTalking. > >If she has CakeTalking, and the Dimension Pro support doesn't work, >then 9 times out of 10 it is because the display settings are not set >as indicated in the CakeTalking Setup instructions. >Theme, appearance settings, performance settings, screen resolution, >and others must be correct. CakeTalking will work with Sonar if many of >these are wrong, but the difficult to support plugs like Dimension Pro, >Rapture, the 64-bit effects, and others won't work unless the screen >appears as expected. > >Bryan > > >-----Original Message----- >From: ddots-l-bounce@xxxxxxxxxxxxx >[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Cameron Strife >Sent: Sunday, May 01, 2011 8:56 PM >To: ddots-l@xxxxxxxxxxxxx >Subject: [ddots-l] Re: Browse button in dimension Pro > >Hi. You'll want to use hot spot clicker to access VIs like dimension >pro, rapture, etc. If you are using hsc, what version are you using >and are you using the latest hot spots from the hsc web site? > >Cameron. > > > >On 5/1/11, Julie M. <jewelsong21@xxxxxxx> wrote: > > Hi. > > > > I'm attempting to browse patches in Dimension Pro. However, Jaws > > will not focus on the button no matter what I do. I've tried routing > > the Jaws cursor, but no joy there either. > > > > Thanks for any help. >PLEASE READ THIS FOOTER AT LEAST ONCE! >To leave the list, click on the immediately following link: >ddots-l-request@xxxxxxxxxxxxx?subject=subscribe >If this link doesn't work then send a message to: >ddots-l-request@xxxxxxxxxxxxx >and in the Subject line type >unsubscribe >For other list commands such as vacation mode, click on the immediately >following link: >ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > >PLEASE READ THIS FOOTER AT LEAST ONCE! >To leave the list, click on the immediately following link: >ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >If this link doesn't work then send a message to: >ddots-l-request@xxxxxxxxxxxxx >and in the Subject line type >unsubscribe >For other list commands such as vacation mode, click on the immediately >following link: >ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faqPLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
