[ddots-l] Re: CT4 & Sonar 5
- From: "shawn brock" <shawnbrock@xxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 14 Mar 2006 19:54:36 -0500
hello david, ct will some what function with sonar 5 but it is by no means
relyable. if you install sonar 5 it will in no way harm your system. i'm
thinking that the mager thing you wont hav access to the track inspecter.
and a few other things i'm sure. if you are on sonar 4.3 you might want to
upgrade to 4.4. if you are at sonar 4 or 4.2 dont bother updateing. 4.3 is
offel. in my humbel apenyon. good luck
----- Original Message -----
From: "David P Shortland" <david@xxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, March 14, 2006 7:52 PM
Subject: [ddots-l] CT4 & Sonar 5
> Greetings from Down Under....:)
>
> Is anyone using CT4 with Sonar 5?
>
> CT4 and Sonar 4.03 are very happy together, just having a little trouble
> when I start getting a lot of trax (around 30 or so) with plugs in etc
> etc... I feel that JAWS loses focus quite a lot and cannot find name of
> trax or even locate trax themselves.
>
> I did read somewhere to locate a track by name , but could not find it on
> reread of CT Tutorial, perhaps someone could point me in the correct
> direction?....:)
>
> I do not wish to compromise my system if I install Sonar 5.
>
> With much thanx....
>
> David
>
> (Still really really enjOying CT) ....:)
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
