[ddots-l] Re: Dimension Pro question (Piano samples)

  • From: "Bob Reid Info" <info@xxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Wed, 2 May 2007 13:07:28 -0400

Hi Jean and Chris. I didn't realize recording at 44100 was still considered acceptable even with my big ideas for SACD or DVD audio surround at some point in the future. To be honest, I can't hear a difference either although audiophiles always talk about improved high-end dynamics and openness etc. I'm running a Delta AP1/2 for Sonar and it allows Sonar to render everything at 32 bit. Should I go with 24? About dropouts, getting another harddrive exclusively for Sonar projects should solve all my problems. My current harddrive has lots of room but plenty of installed programs including Windows XP. I'll report when I get another one.

Thanks for all the help and suggestions.
Bob.
----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, May 02, 2007 11:57 AM
Subject: [ddots-l] Re: Dimension Pro question (Piano samples)


Hey Bob!
First of all, there's no reason to record at 96 KHz especially if you are going to render the project to 44.1 at some point to make a CD. I run a professional recording studio here and I do all my tracking at 44.1, 24 bits, of course. and I have an Intel Core 2 Duo 6600 processors running at 2.4 GHz with 2 internal SATA drives...

With your computer configuration,you should record at 44.1 KHz and at 24 bits if your audio card allows it. That way, you'll take some load of your system and believe me, you wont notice a difference. As for recording on the only one drive, that's not a very good idea. Ideally, you should have a second internal drive to record to. Failing that, recording to an external firewire drive might be better than recording on your lonely drive. There are many factors which can cause drop outs on your systems and I certainly don't know enough about your set-up to go into this but start by recording at 44.1 KHz and if your using Sonar, try increasing the audio buffer size.
The way to do this will vary wheter you are using asio or WDM drivers.
That's all I can offer for now and I hope it helps a bit.
Jean

Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com

----- Original Message ----- From: "Bob Reid Info" <info@xxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, May 02, 2007 11:28 AM
Subject: [ddots-l] Re: Dimension Pro question (Piano samples)


Hi Jean. I'm running Intel(R) Pentium(R) 4 CPU 3.20GHZ with 1.00 GB of ram.
I'm also getting plenty of dropouts in audio projects at 32 bit regardless
of the number of tracks and even after turning off all my spyware and
antivirus programs.
Having said that, I record everything onto my one and only harddrive. Is it
better to run an external and record everything onto it instead?
Bob.
----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, May 02, 2007 4:14 AM
Subject: [ddots-l] Re: Dimension Pro question (Piano samples)


Or the computer is not fast enough to run it?
Jean

Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com

----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, May 02, 2007 12:14 AM
Subject: [ddots-l] Re: Dimension Pro question (Piano samples)


rankly I have never even tried recording anything at 96k.  I have my own
theories about this that probably don't need to be discussed here. If you
are having these issues, it's probably because it really hasn't been
tested
under those conditions.
Gord
----- Original Message ----- From: "Bob Reid Info" <info@xxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, May 01, 2007 11:26 PM
Subject: [ddots-l] Dimension Pro question (Piano samples)


Hello Sonar users.  Has anybody successfully loaded Piano samples from
Dimension Pro at rates higher than 48000?  Of course the samples
themselves are all 44100 but the Dimension Pro manual says you can load
them into any project at any sampling rate.  Whenever I try to record
something using a Dimension Pro Piano program at 96000, the upper
register
notes have a clicky quality, almost like a toy Piano.  Also, playback
causes buzzing, pops and a general malfunction of Dimension Pro.  Any
ideas?  I would prefer to record everything in high res.
Bob.

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: