[ddots-l] Re: Help Needed quickly

  • From: "HF" <neep23@xxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Mon, 5 Jun 2006 18:22:03 -0400

Jim, write to me off list with you're phone number and I'll try to help you.

neep23@xxxxxxxxxx
HF
  ----- Original Message ----- 
  From: Jim 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Monday, June 05, 2006 6:05 PM
  Subject: [ddots-l] Re: Help Needed quickly


  Greg, I did what you suggested, I selected both tracks from beginning to end 
and alt plus F and E, named the file and pressed enter and again when I played 
the project back with the windows media player all I get is the instrumental 
and no vocals.  Any other suggestions from anybody and or Greg?  Thanks.
    ----- Original Message ----- 
    From: Greg Brayton 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Monday, June 05, 2006 4:48 PM
    Subject: [ddots-l] Re: Help Needed quickly


    Hi Jim I think if it was me, I would use just the vocal and the 
instrumental track. Listen to the two together, get the volume set how you like 
it, select both tracks from beginning to end, then export to wave, or i think 
it says, export to audio, I use the key strokes, alt f, then e, then a, and you 
can shift tab to decide which folder you want that saved wav file saved to. 
After that it oughta play just fine sir.
    Hope I'm clear enough and that it works for ya of course!
    Gordon showed me how to do that a while back, and I've done it that way 
every since. So much better than recording on to a third track. Then if you 
don't like the mix, you just tweek one or two things and redo the process. It's 
neet!

    http://www.gbrayton.com
      ----- Original Message ----- 
      From: Jim 
      To: ddots-l@xxxxxxxxxxxxx 
      Sent: Monday, June 05, 2006 4:40 PM
      Subject: [ddots-l] Help Needed quickly


      Hell all, I posted this one earlier and no one responded so here goes 
again.  I have a delta 10/10 sound card connected to my computer with a Mackey 
mixer two monitors and a midisport.  I imported and instrumental track in to 
Sonar and a vocalists recorded the vocals on a separate track.  I armed a third 
track and went in to record and once completed I soloed the third track and 
went in to play back and got nothing.  I did a bounce to track and played back 
the third track and got both the vocals and the instrumental.  However, after 
mixing down the project and playing it back with the windows media player I had 
no vocals just the instrumental track.  Can some one help me with this problem? 
 Thanks

Other related posts: