Hi, DJX.
Will try both the Sonar steps and SoundForge--good to know I can do it
with the demo, more ways to skin a cat.
Thanks,
Dani
On 6/21/16, DJX <megamansuperior@xxxxxxxxxxx> wrote:
Haven't done it myself, but try this:PLEASE READ THIS FOOTER AT LEAST ONCE!
1. Import the audio tracks to sonar from cd. Each track should be on its own
audio track.
2. Set the pan of all those tracks to the side that has the performance
track.
3. At this point, the audio will be coming from 1 speaker only, but it
should be just the performance track.
4. This is the part I haven't tride, but if you want the track to come
through on both speakers, set the master buss to mono, see if that brings it
to the center. I'm not at the studio now so can't verify if such trick would
work, but if you try it before I can, report back, just in case anyone else
might be wondering the same thing.
If that doesn't work I have a few other ideas on how to do it, but this one
might be the easiest.
Alternatively, this process will be much easier if you have sound forge on
your system; even a demo.
You just load the file, use tab to switch to the channel you don't want,
select all of it using ctrl+a or ctrl+shift+end, go to process, mute, and
that channel should disappear. Now, to get the reaming material to the
center, use tab again to enable both channels,do a ctrl+A tto select all,
and use the process>channel converter to conver from stereo to mono; use the
stereo to mono (100%) preset. The track shouldn't clip, since 1 of the
channels has no content in it. If the track does clip for some reason, use
the stereo to mono 50%, and normalize the track to 0db to bring the valume
back up at a safe level with no clips.
HTH, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dani Pagador
Sent: Tuesday, June 21, 2016 2:22 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] How to Drop Out Vocals from Imported CD Track with Sonar
8.5
Hi, Everyone.
I have a vocal work-out CD with split tracks, where the accompaniment is on
one side and the vocals on the other. The school uses Garage Band and shows
how to drop the vocals out, then burn just the accompaniment to CD so the
student can have h/is own custom work-out CD with the tracks that best suit
h/im.
How can I do this with Sonar? I am Macless, so have no access to Garage
Band.
Thanks,
Dani
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
