[ddots-l] Re: Inserting Modulation control
- From: "Nicaise D" <nicaise@xxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 23 Sep 2006 13:45:41 -0700
Wolf,
This is what you need to do--
In order for you to do multi timbral / multi tracks / multi channel
sequencing with an external sequencer e.g. Sonar with your Motif both your
motif and Sonar need to communicate with one another through more than one
MIDI channel. You will therefore need a MIDI board e.g. edirol um, sporster,
etc via which your keyboard and Sonar will talk to each other. So get
yourself a MIDI card and a pair of MIDI cables; that's for the hardware part
of things. You will then need to configure Sonar to work with your MIDI
card. From that point on you will have a standard MIDI set up and things can
begin to happen for you. If you need to know where to buy MIDI cards and
cables, I would suggest you talk to Dancingdots. If you have further
questions on this you can reach me at my direct e-mail- "nicaise@xxxxxxx"
and I will give you my phone number. So don't worry you are just a couple
of steps away.
I hope that helps.
Nicki D
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Wolfgang Angermann
Sent: Saturday, September 23, 2006 12:46 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Inserting Modulation control
It's just like that. I only connect via USB.
If you give me your phone number via Private mail, I can call you. I'm
livving in Hanover, Germany.
Are you on skype?
Wolfgang
----- Original Message -----
From: "Nicaise D" <nicaise@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, September 23, 2006 9:15 PM
Subject: [ddots-l] Re: Inserting Modulation control
> Wolf,
>
> Now that you described your set up I may have a better picture of the
> situation. When you say you are connected via USB do you mean that you
> actually have absolutely no MIDI interface board (e.g. Edirol UM, PS/E,
> etc...) and MIDI cables connecting your Motif to Sonar? The answer to that
> question will determine what I tell you next. The way you are currently
> set
> up, only channel 1 is transmitting and receiving.
>
> Also if you are in the US you may want to contact me over the phone so
> that
> we can sort this out for you quickly and get you on your way to producing
> music and all that good stuff.
>
> Nicki D
>
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Wolfgang Angermann
> Sent: Saturday, September 23, 2006 9:42 AM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Inserting Modulation control
>
> Hello nicaise D,
>
> thank you for your information. However, I'm afraid, I did not succeed
> very
> well. Seems like I have not yet found the propper settings for my Motif.
> Can
> I describe?:
>
> My Motif is connected via USB.
>
> I set the channels to omni, set local to off, and midi to USB.
>
> With sonar, of course, I use the song or the pattern mode.
>
> After importing the Yamaha_motif.ins-file, I can read all the patch names
> in
> the patch browser and also can hear the different instruments.
>
> Now, as long as I choose track one and, in the track properties browse
> through the patches I get all the original Motif sounds. But when I do the
> same on other tracks I only get the dry sound of the patch. A distinct
> example is the Auto-wawa Guitar. On track one it will sound as expected,
> while on track two i lose the wawa-effect. So, maybe, there stil is
> something wrong with my channel settings.
>
> I'd really be happy if you or someone in this list could give me some
> help.
>
> Thanks in advance.
>
> Wolfgang
>
> ----- Original Message -----
> From: "Nicaise D" <nicaise@xxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, September 18, 2006 12:49 AM
> Subject: [ddots-l] Re: Inserting Modulation control
>
>
>> Wolf,
>>
>> This is a follow up to your problem regarding not getting modulation to
>> respond when you are in song mode. Upon further testing modulation
>> responds
>> on my machine regardless whether I am in song or pattern mode And the
>> event
>> view does show modulation events indeed present. So if you are still
>> experiencing the problem it may be specific to your machine. In that case
>> I
>> would suggest that you re-initialize your motif to restore it to the
>> factory
>> preset and that should pretty much take care of things for you. Be sure
>> to
>> save any thing you may have created on it before re-initialize it.
>>
>> I hope that helps.
>>
>> Nicki D
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>> On
>> Behalf Of Wolfgang Angermann
>> Sent: Tuesday, September 12, 2006 9:28 AM
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] Inserting Modulation control
>>
>> hi, this is a question to all those who with CT use the yamaha motif.
>>
>> I don't manage to get the modulation controller one work with any organ
>> patch I assign to a sonar track. Turning the modulation wheel also
>> doesn't
>> have any affect. While I'm using sonar I switch to the song mode. Now
>> when
>
>> I
>> turn on the voice mode - just to try - the modulation wheel works
>> properly.
>>
>> Can anyone give me a hint? Thanks!
>>
>> Wolfgang
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
