[ddots-l] Re: Live gigs <additional comments>
- From: "Jim Jackson" <cs2011@xxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 17 Aug 2013 21:44:51 -0400
Thanks Mike!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Mike Tyo
Sent: Saturday, August 17, 2013 8:40 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Live gigs <additional comments>
Jim,
One thing I forgot to mention, and this will be a personal preference, and
that is that I prefer to use uncompressed audio for live performances. If
you have a player that can read 16 or 24-bit Wave files, etc, I think you'll
find that the overall sound of your setup will be superior - especially if
you'll eventually be getting into a decent sound system. A lot of folks are
using good quality MP3 or WMA files, but if you're doing things that have a
wide range of frequencies and so forth, you might want to consider rendering
your tracks to an uncompressed format. The duo I mentioned in my last
message has a player that can read 24-bit Wave files, and they store their
data on an SD card; and I do the same thing too. Believe it or not, I use
the Plextalk Pocket for my player. It'll read 24-bit Wave files; the only
thing I have to be careful of is that the voice guidance isn't too loud. I
don't know of any of the other brands of talking players/recorders out there
have features that allow you to have the voice not routed through the
outputs. Perhaps someone on the list may have additional info on that one.
Hope this helps.
Mike
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
