[ddots-l] Re: Newby question on MIDI
- From: "Phil Muir" <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 11 Aug 2010 09:53:31 +0100
You will need to plug some cables from you're keyboard to the audio inputs
on you're sound card. Then select those audio inputs in Sonar.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Justin Kauflin
Sent: 11 August 2010 07:42
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Newby question on MIDI
OK, please don't cringe in fear, hopefully this will be relatively painless
for you guys. As it was stated in the subject, I'm most definitely a newby
slowly working my way around Sonar. Heres the deal.
I'm running Sonar 8.5.3 with CakeTalking 8.5 scripts. I've been having no
issues with soft synths, but, as you might guess, I'm running into a little
snag with regards to getting everything to work right with MIDI and external
gear.
My sound card, which is sadly a Tascam US122MKII, is receiving the MIDI
signal from my controller, and I have the MIDI input set to the Tascam MIDI
in, and the output set to the Tascam Midi out. I have the MIDI cable
running to my Motif. The audio out of the Motif is running back to the
Tascam line in ports. The problem is that I am not hearing the signal
coming in from the Motif.
I plugged my headphones into the Motif to make sure it was receiving
signal, and all was well there.
I think that covers it. Feeling a bit fried right now. I'm sure I'm
missing something very stupid, but haven't been able to suss it out just
yet. And, if you want to point me to the tutorial, I have spent a good
while with it, so if there's a point made there, I am apparently not
grasping it...
Thanks for any help, and thanks for your patience.
JustinPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
