[ddots-l] Re: Newby question on MIDI
- From: "Charles Marston" <rumbero73@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 11 Aug 2010 06:18:54 -0400
Justin:
In order to hear the Motif signal coming into your tascam, you will need to
insert an audio track into Sonar, select the tascam inputs you have the
Motif connected into, and then turn the input echo on and or arm the track
using control-a. However, this should be done only when you want to record
your midi track into an audio track. If you only want to record your midi
tracks for now, you should have your motif audio outputs, and also your
Tascam audio out puts connected to an external mixer so that you can hear
everything together. Then, once you are ready to convert your midi tracks
into audio, you will connect the Motif's audio out puts into your Tascam and
record it into an audio track in Sonar.
--------------------------------------------------
From: "Justin Kauflin" <blindguy500@xxxxxxxxxxx>
Sent: Wednesday, August 11, 2010 2:42 AM
To: <ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] Newby question on MIDI
OK, please don't cringe in fear, hopefully this will be relatively
painless for you guys. As it was stated in the subject, I'm most
definitely a newby slowly working my way around Sonar. Heres the deal.
I'm running Sonar 8.5.3 with CakeTalking 8.5 scripts. I've been having no
issues with soft synths, but, as you might guess, I'm running into a
little snag with regards to getting everything to work right with MIDI and
external gear.
My sound card, which is sadly a Tascam US122MKII, is receiving the MIDI
signal from my controller, and I have the MIDI input set to the Tascam
MIDI in, and the output set to the Tascam Midi out. I have the MIDI cable
running to my Motif. The audio out of the Motif is running back to the
Tascam line in ports. The problem is that I am not hearing the signal
coming in from the Motif.
I plugged my headphones into the Motif to make sure it was receiving
signal, and all was well there.
I think that covers it. Feeling a bit fried right now. I'm sure
I'm missing something very stupid, but haven't been able to suss it out
just yet. And, if you want to point me to the tutorial, I have spent a
good while with it, so if there's a point made there, I am apparently not
grasping it...
Thanks for any help, and thanks for your patience.
JustinPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
