[ddots-l] Re: Odd Mix Down issue
- From: "Darren H" <darren@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 19 May 2009 16:05:05 +0100
Hi
I've fixed it now.
I just deleted everything in the tracks and recorded it all again.
Luckily it was only loops and arps, so it took about 30 minutes.
Cheers
Darren
----- Original Message -----
From: Stacy Blackwell
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, May 18, 2009 10:02 PM
Subject: [ddots-l] Re: Odd Mix Down issue
I can't explain the 8 3/4 bars being all that is mixed, but you might could
try deleting the whole from bar33 to the end and save as a new project. Then
use the Alt with the Enter keys to select the entire length (now 32 bars). I'm
just offering a possible solution to get it to export correctly, although I
feel like your efforts should have worked. I wonder why 8 3/4 bars???
> From: darren@xxxxxxxxxxxx
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Odd Mix Down issue
> Date: Sat, 16 May 2009 16:17:16 +0100
>
> Hi
>
> yes, I did make sure I selected all tracks from start to finish.
>
> Cheers
> Darren
> ----- Original Message -----
> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, May 16, 2009 4:15 PM
> Subject: [ddots-l] Re: Odd Mix Down issue
>
>
> > Hi Deren,
> > Before you strat to export, did you check that all the tracks have been
> > selected by pressing Control+Enter two times?
> > If it says all the tracks have been selected from 1 to 33, then, the
> > problem might be something else.
> > Regards,
> > Berhane
> > ----- Original Message -----
> > From: "Darren H" <darren@xxxxxxxxxxxx>
> > To: "Dancing Dots List" <ddots-l@xxxxxxxxxxxxx>
> > Sent: Saturday, May 16, 2009 7:22 AM
> > Subject: [ddots-l] Odd Mix Down issue
> >
> >
> >> Hi all.
> >>
> >> I'm trying to Mix down a 32 bar track using the file export function.
> >>
> >> The first thing I do is set my start and end points to 1 and 33.
> >>
> >> I then do control, then enter 3 times to select all tracks from bar 1 to
> >> bar 33.
> >>
> >> I go through the exort procedure.
> >>
> >> What is happening is only the first 8 and three quarter bars is being
> >> mixed down.
> >>
> >> This happens in both exporting .wav and .mp3.
> >>
> >> I can't figure out what's going on.
> >>
> >> What should I be looking at as possible problems.
> >>
> >> Cheers
> >> Darren
> >> PLEASE READ THIS FOOTER AT LEAST ONCE!
> >> To leave the list, click on the immediately following link:
> >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> >> If this link doesn't work then send a message to:
> >> ddots-l-request@xxxxxxxxxxxxx
> >> and in the Subject line type
> >> unsubscribe
> >> For other list commands such as vacation mode, click on the immediately
> >> following link:
> >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> >> send a message, to ddots-l-request@xxxxxxxxxxxxx
> >> and in the Subject line type
> >> faq
> >>
> >>
> >
> > PLEASE READ THIS FOOTER AT LEAST ONCE!
> > To leave the list, click on the immediately following link:
> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> > If this link doesn't work then send a message to:
> > ddots-l-request@xxxxxxxxxxxxx
> > and in the Subject line type
> > unsubscribe
> > For other list commands such as vacation mode, click on the immediately
> > following link:
> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> > send a message, to ddots-l-request@xxxxxxxxxxxxx
> > and in the Subject line type
> > faq
> >
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
------------------------------------------------------------------------------
Hotmail® goes with you. Get it on your BlackBerry or iPhone.
Other related posts:
