[ddots-l] Re: Question: Setup playing drumset with bass and kick playing as loop
- From: "blue wings" <bluewings1983@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 21 Oct 2007 01:49:16 +0200
Yes,I'd like to know the same.
And I have sekond kquestion,how to make in sonar 6 and cake talking
sidechain.
What is sidechain?
Sidechaining is a mixing technique that allows you to have one plug-in
affect the track or bus it's inserted on based upon another signal's
properties.
A simple example would be "ducking." A technique often used in radio
broadcasts-Sometimes, there will be music playing in the background while a
DJ is speaking.
When the DJ is not talking the music is louder, and when he begins again, it
turns back down.
This is accomplished by routing the signal from the radio personality's
microphone to the "Sidechain input" of a compressor. There is a second input
on
the device where the music (the signal to be processed) is sent. The output
from the compressor will be the music at varying levels, depending on the
volume
of the DJ's voice. The louder the voice from the mic is, the more the music
signal is attenuated or turned down.
That's a fairly practical use for sidechaining. However, the
creative/musical possibilities can be pretty awesome. For example: You can
have a sustaining
guitar chord on one track and have it "trigger" on and off based on the
signal sent from your hi-hat track.
here is example:
http://www.fileden.com/files/2007/5/15/1081557/mp3.mp3
----- Original Message -----
From: "Patrick Schuppe" <p.schuppe@xxxxxx>
To: <midimag@xxxxxxxxxxx>
Cc: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, October 20, 2007 10:48 PM
Subject: [ddots-l] Question: Setup playing drumset with bass and kick
playing as loop
Hi folks,
this is realy something I think that only cracks can know!:-)
I am wondering if the following is possible:
I want to setup a drumset that contains of a kick and a bass. the kick is
always the same. But the bass changes when other notes are played.
Now I am asking my self if there is a solution with Ct 5.3 and Sonar 5.2
to
setup a drumset where the kick and the bass is Konstantly playing as a
loop
when a note is pressed and when its released the loop stops.
Do you all understand what I want to create here? When for example I found
my faforite kick and bass and may be a few snares, claps and so on I could
set that up as a drumset playing as a loop and I have my drumset plus the
changing bass when I play other notes.
Thats a standart techno drumset then that other software the people in
Germany use for Techno / trance allready has.
I would realy give a lot to find out if something like that is possible
and
the help of creating it.
Thanks to you all for at last reading this and get the brain working.
Best regards,
Patrick Schuppe
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
