Hi, The meanings of those commands are hard-coded into Sonar, so their position in the .ini file is irrelevant, so long as they're in the [Options] section. You can find out what options are available in the .ini files by going into Sonar Help, bringing up the Index page and typing something lie: initialization file into the search box - you'll get a small list of hits to read through. Best wishes. Tim Burgess Raised Bar Ltd PO Box 4442 Atherstone Warwickshire CV9 9AT Phone: +44 (0)1827 719822 Email: tim@xxxxxxxxxxxxx Web: http://www.raisedbar.net Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]On Behalf Of Jean-Claude Provost Sent: 03 August 2007 13:57 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Reverting the local mode on my Roland RD-350 keyboard Hey Tim, Thanks for the info; I'll give that a try and let you know how it goes. Something I'm not getting however, is how does Sonar figure out if the command has to be executed when entering as opposed to when exiting? For instance, let's just say, for argument's sake that I was to put both SendLocalOn and SendLocalOff equal to 1, how the heck would those be differentiated, since they'd both be in the same [option] section? Or is there something I'm missing? Finally, can you tell me where you found what could be entered in that .INI file. Is it somewhere in the Sonar Help? Cheers, Jean-Claude Provost TransaxSens \ Skype: canadianfrog -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess Sent: Thursday, August 02, 2007 10:51 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Reverting the local mode on my Roland RD-350 keyboard Hi, You need to edit your TTSSEQ.INI file. For Sonar 6.2.1, you'll find it in the following folder: C:\Documents and Settings\(your user name)\Application Data\Cakewalk\SONAR 6 Producer Edition For Sonar 6.2 and earlier, you'll find it in: c:\program files\cakewalk\Sonar 6 Producer Edition\ Both of the things you mentioned require entries within the [Options] section of the file. To send a local off at Sonar startup, you will need a line like this: SendLocalOff=1 To send a local on when you close Sonar, you need: SendLocalOn=1 You may find that your local on line isn't necessary, so just try adding the local off line first and see if your hardware automatically reverts to local on when you quit Sonar. If this fails, add the SetLocalOn line and try again. Both of these worked well for me with Sonar 5 and earlier with my Kurzweil K2600 but the SendLocalOn doesn't seem to have an effect in Sonar 6 and I have to manually reset my Kurzweil (KDR is wonderful). I'd be very interested in how you get on with this. Best wishes. Tim Burgess Raised Bar Ltd PO Box 4442 Atherstone Warwickshire CV9 9AT Phone: +44 (0)1827 719822 Email: tim@xxxxxxxxxxxxx Web: http://www.raisedbar.net Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]On Behalf Of Jean-Claude Provost Sent: 02 August 2007 14:18 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Reverting the local mode on my Roland RD-350 keyboard Hi all, I'd like to get rid of the weird phasing generated by the output from the keyboard's "local mode" which becomes doubled when entering Sonar. I believe that if I turn "local mode" off that will solve this problem. So, Is there a way I can accomplish this automatically (using an .INI file command or something? In my ideal dream world, the "local mode" would get turned off as I enter Sonar, then back on again as I exit the application. If my dream can't come true, could anyone share any knowledge that would make it easier than having to do it each time using the menus on the keyboard itself? Thanks a bunch! Also, does anybody have an accessible manual for the RD-350? Cheers from Varennes, Quebec Canada, Jean-Claude Provost TransaxSens \ Skype: canadianfrog -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Stacy Bleeks Sent: Thursday, August 02, 2007 4:10 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] CT update? I've just installed the CT update from the dancing dots site. I believe, however, that the older 6.2 version of CT is still loading and not the 6.24 update. Is there a hot key to find out once I've opened sonar? Also, will the previous tutorials be automatically updated or should I have uninstalled the CT folder from my programs first? Thanks, Stacy ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq