[ddots-l] Re: SV: Re: SV: Re: bounce to track
- From: "Kevin Gibbs" <kevjazz@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 26 Apr 2010 10:00:25 -0500
Freeze synth is the equivalent of bouncing to tracks and will give you an
individual audio track for each soft synth. Once you've frozen your soft
synths, you can use the mp3 converter to create your stereo file to give to
someone who doesn't have Sonar or Sibelius.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Annabelle Susan Morison
Sent: Monday, April 26, 2010 8:49 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: SV: Re: SV: Re: bounce to track
I wonder, is there a way to bounce, say, a softsynth's MIDI Tracks to
separate audio tracks, rather than have the entire mix bounced down into
one? Will that work with the "Freeze Synth" option? Or is that different?
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Kevin Gibbs
Sent: Monday, April 26, 2010 6:43 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: SV: Re: SV: Re: bounce to track
You can bounce the entire project to one audio track, provided that you have
an audio input on your interface to which the audio outputs of your hardware
MIDI synths are wired. Once the MIDI mix sounds the way you like, execute
the bounce to track and then use the mp3 encoder.
Kevin
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dennis Madsen
Sent: Monday, April 26, 2010 8:23 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] SV: Re: SV: Re: bounce to track
Hi Daren!
Yes But i get the message to converd to audiotracks.
Dennis
_____
Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På
vegne af Darren H
Sendt: 26. april 2010 15:13
Til: ddots-l@xxxxxxxxxxxxx
Emne: [ddots-l] Re: SV: Re: bounce to track
Hi Dennis.
If you have the encoder installed already, it would be simpler just to
export the entire mix to an mp3 file.
Then you have no unnecessary tracks tacking up your interface.
Cheers
Darren
If you like electronic, ambient, new age or atmospheric music, become a fan
of The Karmistry Project on Facebook...
http://facebook.karmistryproject.com
You can also follow Karmistry Media on Twitter...
http://www.twitter.com/Karmistrymedia
----- Original Message -----
From: Dennis Madsen <mailto:dennis.madsen@xxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, April 26, 2010 2:10 PM
Subject: [ddots-l] SV: Re: bounce to track
Hi Darren!
I have installed the incoder. So the only problem is to do it the best way
as i am going back to working in the project again after exporting to mp3
format. Is it possible to work in a projekt you have bounced to one track
exept for e q in the strip. Like unfrease or somthing?
Dennis
_____
Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På
vegne af Darren H
Sendt: 26. april 2010 14:56
Til: ddots-l@xxxxxxxxxxxxx
Emne: [ddots-l] Re: bounce to track
You could export the entire mix as .wav and convert to mp3 if you don't have
the encoder already enabled in Sonar.
Cheers
Darren
----- Original Message -----
From: Dennis Madsen <mailto:dennis.madsen@xxxxxxxxxxxx>
To: Dot listen <mailto:ddots-l@xxxxxxxxxxxxx>
Sent: Monday, April 26, 2010 1:46 PM
Subject: [ddots-l] bounce to track
Hi all!
I am working with a singer on a project. I have made the backing and need to
send the project to her for comments. She is not a Sonar user so i have to
send it in a mp3 format.
If i use the bounce to track command is it than possible to get back to
working in the projekct afterwards. or is there a better way to export the
file?
take care!
Dennis
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2835 - Release Date: 04/25/10
18:31:00
Other related posts:
