[ddots-l] Saffire Pro14 Loopback to Sound Forge 10 Pro
- From: Chris Smart <csmart8@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Wed, 15 Jun 2011 13:34:07 -0400
OK, the fun continues.
I've managed to get the Saffire Pro14 loop back working, but my
resulting recordings are in mono. *LOL* This doesn't matter so much
given that I am recording some things from Youtube. But some other
weirdness is occuring.
What I've done so far is:
1. Selected Loop Back routing preset in Saffire Mix Control. Oddly,
this immediately mutes the material being looped from coming out my
monitors.
2. Selected Saffire, Recording Tab, and made sure Loop Back is
checked. Oddly, the scroll down button also can be checked/unchecked.
3. What I'm failing to understand is why there are four checkable
items per line in SF 10's routing options. I'm seeing two lines
marked Loopback 1 and 2 respectively, but four items per line that
can be either a bullet or a "quartercircle", as Jaws reports them.
Are these outputs? Channels? Do I need the first two checked in
each line, or should I check the first two say, in line 1, and the
third and fourth in the second line?
and when recording in Sound Forge, F9 and F10 to read the meters
are reporting "inf" as in, no audio present. But, when I end
recording and go into playback, the material is definitely there,
registers on the meters etc.
As usual, I'm probably missing some very obvious bits in both
Saffire Mix Control and Sound Forge to get this working. I'd like
things to be stereo, and I'd like to hear what is being recorded.
Thankfully, my default setup is saved to the hardware itself, so
ALT+F then L gets me back to my regular setup for
tracking/mixing/mastering.
Chris
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
