I highly recommend you join the x32 whatsapp group. They are helpful
and Derick, the guy who created it has some documentation that may be
of help.
If you have whatsapp, click on the link with your phone. If you can't
join, I'll see if I can get you a direct link or you can email me your
phone number off list and I'll add you.
http://lanesaudio.com/blog/x32whatsapp/
On 10/28/17, James Robinson <jardatalearningcenter@xxxxxxxxxxx> wrote:
Hello!
After spending lots of time trying to contact Behringer Support for my
Behringer X32 Producer Digital Mixer, I was able to secure and install the
latest firmware directly on the unit to success. I was sent a file that
could be used to setup the system to allow sound through the headphones;
however, I am having trouble accessing the X32 Control Panel to do this. I
have connected my mixer to my internet system and the system sees it. How
do I then upload this file to the system. The Behringer guy says I should
find a load button in the software, but I cannot find anything. If anyone
knows how to use this software, do share this knowledge with me. My main
thing now is to get sound through the system so if anyone knows how to do
this on the mixer itself, share it with me and I will try it with the help
of my daughter. This system also has an I-Phone/I-Pad app to work with
this
machine, but I am not familiar with how the app works and I have not found
anyone who could explain it to me. I would appreciate help with at least
geing sound routed through the proper channels of this device. I am now
trying to go through the manual for this system but it is going slow.
Thanks for your help.
James Robinson
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
