Hi Floyd and the community,
How could I help you with your question relating to Jim Jackson and his Tascam
fw1884? So you would like to help Jim to be able to use that DAW, the Tascam
fw1884, to work on both its speakers without the need of hearphones.
Thank you.
Adel
-----Message d'origine-----
De : ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] De la ;
part de floyd white
Envoyé : 1 mai 2020 20:56
À : ddots-l@xxxxxxxxxxxxx
Objet : [ddots-l] Re: Slightly off topic?
It requires some troubleshooting.
Here's some things.
* Try other channels from the Mackie to the Tascam.
* Try reversing your cables from the Mackie to the Tascam. If the sound moves
to the other side, your cable is bad.
* I don't know the Tascam but is there possibly a pan pot not centered in the
Tascam control panel.
* Is it possible that you muted one side in the Tascam
On 5/1/20, Jim Jackson <cs2011@xxxxxxx> wrote:
Hello all, I'm using my mackey 1642 to feed my Tascam fw1884, I have a
mic plugged in to the Mackey, I have headphones plugged in to the back
of the Tascam, I'm only hearing audio out of the left side of the mix,
when I plug in to the mackey with phones, I'm hearing the audio out of
both sides. Any ideas? Have I provided enough information? Thanks
