[ddots-l] Re: Tascam FW1884
- From: "Mark Brierley" <mark.brierley@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 22 Jun 2009 14:01:04 +0100
Thanks Phil
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: 22 June 2009 14:00
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Tascam FW1884
Mark. The FW-1884 stays in the mode that you last left it in.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
----- Original Message -----
From: Mark <mailto:mark.brierley@xxxxxxxxxxxxx> Brierley
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, June 22, 2009 1:46 PM
Subject: [ddots-l] Re: Tascam FW1884
Thanks Phil, I shall try that later.
What mode does the Tascam default to? Is it a case of switching it to
computer mode every time you turn it on, and if so, must this happen before
Sonar is opened?
Cheers, Mark
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: 22 June 2009 10:14
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Tascam FW1884
Hmm, wonder if you have put the FW-1884 into computer mode? you need to be
in order for the faders to work in Sonar.
By the way. just a quick reminder to any of you who may have missed it, all
documentation, Tascam drivers etc have been moved to the new training
website:
http://www.accessibilitytraining.co.uk/
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
----- Original Message -----
From: Mark <mailto:mark.brierley@xxxxxxxxxxxxx> Brierley
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, June 22, 2009 9:25 AM
Subject: [ddots-l] Tascam FW1884
Hi guys
I set up my FW1884 yesterday. I used the download from Phil's website, so I
knew I had the most up to date drivers etc.
I set the FW1884 Control in both the midi in and out fields in Options/Midi
Devices dialogue. I then went in to the control surfaces dialogue under
options and added the Tascam to the list, again setting the FW1884 control
as the midi in and midi out.
The Tascam did then seem to work. I was monitoring a project through it,
adjusting track levels with the faders, soloing tracks etc. However, there
was one thing that did not seem to work. I can adjust the track and stereo
bus levels with the faders. However, when I change the levels in Sonar, the
faders on the FW1884 do not seem to move to the corresponding points on the
mixer. Does anyone have any idea why this would be? Is the Tascam sending
midi out to the computer and not receiving midi in? Any help greatly
appreciated.
You maybe seeing rather a lot of me in the coming weeks. Smile
Thanks, Mark
Other related posts:
