[ddots-l] Re: Trouble With a Virtual Instrument in Sonar

  • From: Dave Munroe <dmunroe610@xxxxxxxxx>
  • To: ddots-l@xxxxxxxxxxxxx
  • Date: Wed, 10 Apr 2019 11:55:47 -0500

Do you have other soft synths instruments that you’re using with the new 
plug-in that you mentioned? I have a pretty high-quality drum pack for session 
drummer three that I use that can be a little bit of a memory hog. Hope you get 
it figured out.



Sent from my iPhone

On Apr 10, 2019, at 7:09 AM, Annabelle Susan Morison 
<foristnights@xxxxxxxxxxx> wrote:

Trouble Is, it's happening despite the fact that I am actually using the 
64-bit version of Sonar. Isn't that crazy?

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Dave Munroe
Sent: Wednesday, April 10, 2019 4:26 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Trouble With a Virtual Instrument in Sonar

Annabelle,

If you are like me and your DAW  only has 16 gig of memory in it, you may run 
out of memory depending on the quality of the soft synth  that you’re loading 
and what other instruments and affects you have going at that time. I have a 
64 bit machine but started out using the 32-bit version of sonar. After some 
time, I started experiencing dropouts and a lot of sluggish behavior. I have 
only been using the 64-bit version ever cents. That works much better.

Hope this helps.

David Munroe

Sent from my iPhone

On Mar 30, 2019, at 5:46 PM, Annabelle Susan Morison 
<foristnights@xxxxxxxxxxx> wrote:

Hi, it's Annabelle.
I purchased FM Tines 2.0 (http://fmtines.com) back in February of this year, 
and there seems to be a problem. I opened it up as a VST within Sonar, and 
when I tried to load a sound, the screen went white and my machine froze! 
Next, I started a new session by loading an instrument like Stylus RMX, and 
that works. But the moment I load FM Tines 2.0, it immediately cancels out 
any sound signals from other instruments. I uninstalled the whole program 
and then reinstalled again, but the same result comes up. when I try to load 
patches, I hear no sound, whether I have the output in Sonar's bus pane set 
to my monitors or my headphones. Even worse, my machine sometimes likes to 
freeze! Then I have to totally restart the computer when Sonar stops 
responding. What's up with that, I wonder? What do I do next? Is it possible 
that this new version of FM Tines has a compatibility issue with Sonar 8.5 
Producer Edition 64 Bit, since that's an older version of Sonar? I'm a bit 
confused on that one! As far as I know, Jamal, the guy who makes FM Tines at 
http://www.gospelmusicians.com, says that this new version is compatible ;
with all 64-bit DAW's.

Other related posts: