[ddots-l] Re: audio stutter
- From: "Nick Daniels" <nick.dan@xxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 29 Aug 2013 02:17:32 +0100
Thanks chris, i have resolved the issue a few weeks ago.
I'll probably have to do the same to the studiocapture when i get round to
recording live drums, but it's time yet.
-----Original Message-----
From: Chris Smart
Sent: Thursday, August 29, 2013 1:49 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: audio stutter
Sure, increase the buffer settings for your audio interface.
That's only one possibility though. Since we don't know what sort of
system you have, it's impossible to narrow down possible causes.
At 04:00 PM 8/12/2013, you wrote:
Hi People.
I am currently getting to grips with sonar 8.5 with the with the cake
talking scripts.
I have come across a slight issue concerning the audio play back engine.
There is quite a bit of stuttering going on in the sound. can any one
reccommend any remodees?
I'm currently using a roland quad capture audio interface.
cheers, Nick.
-----Original Message----- From: Rusty Perez
Sent: Monday, August 12, 2013 4:05 PM
To: linux-audio-user ; nama@xxxxxxxxxxxxx ; ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] sortof OT -- ART tube pac preamp and compressor noisy?
Hi folks,
This is related to recording, and my recordings are made on linux, so,
it is tangential to all of these lists. :-)
I own an ART tube pac, which is a preamp compressor combo unit.
It is the first generation of this unit I believe. I've just started
using this unit.
Anyway, I'm hearing a low level hum, sortof like a grounding hum.
Does anyone else use the ART line of pres? Has anyone had trouble with
them?
The unit uses 2 tubes and I'm sure they aren't high quality tubes.
Could a lower quality tube cause a low level ground hum?
The unit has a grounded plug, and I can't seem to get rid of the hum
by unplugging other components, but when I mute the unit through my
sound card, the hum is decreased. The hum is audible in silences on
my tracks, so I know it's not just my playback system.
Now, before you go on about how the ART pre is cheap and crappy. I
know it's a budget pre, that's why I can afford it. I'm only looking
for constructive ideas, or similar experience.
Thanks so much!
Rusty
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
