[ddots-l] Re: changing default template that comes up when sonar loads
- From: "Mike Christer" <christer.christer@xxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 18 Dec 2010 14:50:59 -0000
Never needed to, I'm an axeman, 99% of the gigs I've ever done have been
completely organic!
----- Original Message -----
From: Brian Howerton
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 2:27 PM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
Well, if you are using midi files for a gig, how do you normally run them if
you were to run them from your laptop computer? Have you ever done that
before?
----- Original Message -----
From: Mike Christer
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 9:24 AM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
I'm not at my DAW right now, so I can't check, but...
When you go to save the template, look in the list of quote save as type
options unquote, and see if there's anything relevant in there?
I can't remember off the top of my head, as this isn't something I usually
do...
l8r
----- Original Message -----
From: Brian Howerton
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 2:13 PM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
Mike,
That worked but it didn't fix the problem that I am having like I thought
it would. When I load in a midi file, (this was before I changed the template
to the TTS1 template), so I load in a midi file and then I insert an instance
of TTS1 and route all the midi tracks to that, then it will play and the file
will play fine. However, when I try to do a save as with those changes made
and re-open that file that I did a save as on, it doesn't save my routing
changes and the file doesn't play again. So when I open up a midi project, I
have to insert an instance of tts1 and then route all the midi tracks to it
every time before it will play. I'm trying to figure out a way to get these
changes to save with each song, because I am getting ready for a gig tonight
and I really don't want to have to load each song file up and then have to
re-route everything to make it play properly because that would mean it would
be about 2 minutes between each song. I thought changing the template to the
tts1 template would work and fix this problem. Any suggestions? Thanks,
Brian
----- Original Message -----
From: Mike Christer
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 9:00 AM
Subject: [ddots-l] Re: changing default template that comes up when
sonar loads
Go to My Documents/Cakewalk/Sonar/sample contents & press enter on the
AAA template you'd like to utilize...
Now, make any changes you require, like, for instance, FX you typically
use on Auxiliary busses etc. & certain midi trax with any soft synths you might
typically use.
Now, save the template as the folowing:
Note:
(You must write the file name verbatim!)
Normal.cwt
And, save it in the same folder you got the AAA template from.
Now, the "customized" template will load every time you click on the
Sonar icon...
l8r
----- Original Message -----
From: Brian Howerton
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 1:04 PM
Subject: [ddots-l] changing default template that comes up when sonar
loads
Hello all,
Can someone inform me of how to change the default template that
comes with when sonar loads? Thanks,
Brian
Other related posts: