[ddots-l] Re: changing default template that comes up when sonar loads
- From: "Annabelle Susan Morison" <foristnights@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 18 Dec 2010 08:16:27 -0800
Are you thinking of "Cakewalk Projects"?
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Steve Wicketts
Sent: Saturday, December 18, 2010 8:14 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
Hi Brian,
I'm not quite sure what's happening to your projects as no matter what
template is on set up, when you press alt O and then shift tab once to put
you in file name, arrow down through your file names.
When pressing enter on the file name you want all the routing and tracks
from that file should be there exactly how you saved them.
Have you been saving in I think it's called, Sonar Projects?
That will save all the info you need both midi and audio.
If I'm slightly miss leading here, will one of you other guys chime in?
Good luck with your gig.
Steve W
----- Original Message -----
From: Brian <mailto:bshowerton1@xxxxxxxxx> Howerton
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 2:27 PM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
Well, if you are using midi files for a gig, how do you normally run them if
you were to run them from your laptop computer? Have you ever done that
before?
----- Original Message -----
From: Mike Christer <mailto:christer.christer@xxxxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 9:24 AM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
I'm not at my DAW right now, so I can't check, but...
When you go to save the template, look in the list of quote save as type
options unquote, and see if there's anything relevant in there?
I can't remember off the top of my head, as this isn't something I usually
do...
l8r
----- Original Message -----
From: Brian <mailto:bshowerton1@xxxxxxxxx> Howerton
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 2:13 PM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
Mike,
That worked but it didn't fix the problem that I am having like I thought it
would. When I load in a midi file, (this was before I changed the template
to the TTS1 template), so I load in a midi file and then I insert an
instance of TTS1 and route all the midi tracks to that, then it will play
and the file will play fine. However, when I try to do a save as with those
changes made and re-open that file that I did a save as on, it doesn't save
my routing changes and the file doesn't play again. So when I open up a
midi project, I have to insert an instance of tts1 and then route all the
midi tracks to it every time before it will play. I'm trying to figure out
a way to get these changes to save with each song, because I am getting
ready for a gig tonight and I really don't want to have to load each song
file up and then have to re-route everything to make it play properly
because that would mean it would be about 2 minutes between each song. I
thought changing the template to the tts1 template would work and fix this
problem. Any suggestions? Thanks,
Brian
----- Original Message -----
From: Mike Christer <mailto:christer.christer@xxxxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 9:00 AM
Subject: [ddots-l] Re: changing default template that comes up when sonar
loads
Go to My Documents/Cakewalk/Sonar/sample contents & press enter on the AAA
template you'd like to utilize...
Now, make any changes you require, like, for instance, FX you typically use
on Auxiliary busses etc. & certain midi trax with any soft synths you might
typically use.
Now, save the template as the folowing:
Note:
(You must write the file name verbatim!)
Normal.cwt
And, save it in the same folder you got the AAA template from.
Now, the "customized" template will load every time you click on the Sonar
icon...
l8r
----- Original Message -----
From: Brian Howerton <mailto:bshowerton1@xxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, December 18, 2010 1:04 PM
Subject: [ddots-l] changing default template that comes up when sonar loads
Hello all,
Can someone inform me of how to change the default template that comes with
when sonar loads? Thanks,
Brian
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5713 (20101218) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3322 - Release Date: 12/17/10
19:34:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3322 - Release Date: 12/17/10
19:34:00
Other related posts:
