The file you download from Tascam, it needs to be installed so that sonar can
see the fw1884 in the surfaces list. If you use sonar 32 bit, use the 32bit
installer. If you use sonar 64bit, install the 64bit file.
Regards, DJX
________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on behalf of
Jim Jackson <cs2011@xxxxxxx>
Sent: Sunday, October 29, 2017 12:18:04 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re:
[ddots-l] Re: [ddots-l] Sonar doesn’t list my control surface
I don’t know what you mean by, the right control dll. Thanks
Sent from my iPhone
On Oct 29, 2017, at 10:56 AM, DJX
<megamansuperior@xxxxxxxxxxx<mailto:megamansuperior@xxxxxxxxxxx>> wrote:
Make sure that you are using the right control dll. also make sure the fw1884
is in computer mode
Regards, DJX
________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>
<ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>> on behalf
of Jim Jackson <cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>>
Sent: Sunday, October 29, 2017 10:07:16 AM
To: ddots-l@xxxxxxxxxxxxx<mailto:ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: [ddots-l]
Sonar doesn’t list my control surface
Also, whenever I attempt to select the inputs and outputs for the control
surface by pressing enter on eithe option, nothing happens.
Sent from my iPhone
On Oct 29, 2017, at 1:29 AM, Jim Jackson
<cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>> wrote:
I found and installed it. Which drivers do I use?
Sent from my iPhone
On Oct 29, 2017, at 12:21 AM, Jim Jackson
<cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>> wrote:
No! I don’t know what exactly what or how to search for it on the tascam site.
I’m running 64 bit.
Sent from my iPhone
On Oct 28, 2017, at 10:16 PM, DJX
<megamansuperior@xxxxxxxxxxx<mailto:megamansuperior@xxxxxxxxxxx>> wrote:
Did you install the control surface plugin? For the platform you are using (32
or 64 bit)?
Regards, DJX
________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>
<ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>> on behalf
of Jim Jackson <cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>>
Sent: Saturday, October 28, 2017 9:25:43 PM
To: Dancing Dotts
Subject: [ddots-l] Sonar doesn’t list my control surface
I’m using the tascam fw1884 control surface but sonar doesn’t list the device.
There is a tascam us but that’s not what I’m using. Thoughts?
Sent from my iPhone
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
faq