From:
http://us.focusrite.com/firewire-audio-interfaces/liquid-saffire-56
A Host of I/O
Alongside the two Liquid and six Saffire preamps are a host of I/O options.
There are ten analogue outputs, 16 channels of ADAT I/O, stereo S/PDIF, MIDI
and two virtual loopback inputs for routing digital audio between software
applications ideal for capturing audio playback within your computer. Mic,
Line and Instrument inputs all use independent connectors, with the input
type for each channel selectable via custom control software. Consequently,
all the inputs can remain permanently connected, your interface securely in
the rack ready for whatever your recording session demands. In addition,
word-clock I/O is provided on BNC connectors, allowing Liquid Saffire 56 to
act as either a master clock for your studio, or as a slave to an existing
sync system.
Every mic channel features an independent phantom power and a high-pass
filter, switchable from the front panel, with the two instrument channels
also featuring 9dB pads for additional headroom. Front panel five-step LED
metering for all inputs, including ADAT and S/PDIF, offers accurate viewing
of all levels.
Regards, Phil Muir
Accessibility Training
Telephone: UK+44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx <mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
URL:
www.accessibilitytraining.co.uk/ <http://www.accessibilitytraining.co.uk/>
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of John J. Fioravanti, Jr.
Sent: Sunday, December 06, 2015 12:57 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: [dots-l] Interfaces
Phil: how many outputs are on that interface?
Thanks.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Sunday, December 06, 2015 7:00 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: [dots-l] Interfaces
Tommi. You are going to struggle to locate an interface that doesn't have a
software driven control panel. Most of them do now days. I am using the
Focusrite Saffire Liquid 56 which is a firewire interface and it has 8
inputs and a couple of ADAT ports so you can have up to 24 inputs at 44.1
and 48K and 20 inputs above 48K if you purchase some additional pre-amps
such as a couple of Focusrite MKII Dynamics. As for the Scarlet. I have
developed a solution for it however; need someone who is willing to test it
:-)
Regards, Phil Muir
Accessibility Training
Telephone: UK+44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx <mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
URL:
www.accessibilitytraining.co.uk/ <http://www.accessibilitytraining.co.uk/>
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Tommi Vänni
Sent: Sunday, December 06, 2015 9:44 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Interfaces
Hellouu again, Tommi V here.
I find myself needing a better and larger interface. In the near future I'll
need atleast 8 inputs, or 10 would be even better.
The soundcard must not have alot to do with a wisual program. For example I
checked out the Focusrites scarlett 8I6, but found out that the card's
settings are manipulated from a software.
And ofcourse the interface must be compatible with sonar, caketalking and
jaws 12.
If someone could point in the right direction, I could continue my research.
This seems like a area where I could go so terribly wrong and lose a lot
money for nothing.
My thanks for al advice.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
