yep, it's an excelent tool!
At 02:31 PM 12/10/2016, you wrote:
Belarc Adviser is far more informative.
Go to www.belarc.com at look for the free download.
Once installed and run, you get a report which is in the form of a web page, and so can be saved.
George
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Aidan
Sent: 10 December 2016 19:16
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: focusrite issue
I see something called bassboard and the model is not available. There is no entry that says: motherboard: and then the name of manifacturuer.
Not sure if I mis something.
On 08/12/2016, DJX <megamansuperior@xxxxxxxxxxx> wrote:
> Check the motherboard in system info, just type system info in the
> search box, or since you're using 10, check the windows system program
> tile. Or just ask Cortana to open it for you.
> The system summary list should have the make and model of the board.
>
> HTH, DJX
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Aidan
> Sent: Thursday, December 08, 2016 5:33 AM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: focusrite issue
>
> I cannot find what exact info so I guess I must let someone look, and
> I have no eyes nearby now. As far as I'm aware everything regarding
> the electrical conditions is in order.
>
> On 07/12/2016, DJX <megamansuperior@xxxxxxxxxxx> wrote:
>> The power supply would be listed in the build documentation or by
>> looking at it. If it's noisy as you say, that could be a cheap
>> supply, which may be your problem. The power supplies we use for daws
>> are barely audible even under load!
>>
>> Do you know what motherboard your builder used? Check system info. If
>> the board has cheap or bad PWM (CPU power), or if the chokes are low
>> quality, you will have EMI issue no matter what you do. This unit is
>> Buss powered, not on AC right?
>> Also, are you on a surge protector? Have you tried other outlets?
>>
>> Regards,DJX
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx
>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Aidan
>> Sent: Wednesday, December 07, 2016 6:33 AM
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] Re: focusrite issue
>>
>> I tryed another port, and stil making noise. I'm not sure about the
>> power supply. Will that be under system info? I can say though that
>> the power supply make quite a bit of fan noise. That is why I don't
>> use this machine for recording audio much unless if its kasual.
>>
>> On 07/12/2016, DJX <megamansuperior@xxxxxxxxxxx> wrote:
>>> Have you tried different USB ports? Also, do you know what power
>>> supply unit is installed on it?
>>>
>>> HTH, DJX
>>>
>>>
>>> -----Original Message-----
>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Aidan
>>> Sent: Tuesday, December 06, 2016 1:43 PM
>>> To: ddots-l@xxxxxxxxxxxxx
>>> Subject: [ddots-l] Re: focusrite issue
>>>
>>> Its a custom build. I only get issues with this card.
>>>
>>> On 06/12/2016, DJX <megamansuperior@xxxxxxxxxxx> wrote:
>>>> Hi, what machine is this? It sounds like you are experiencing EMI
>>>> interfearence.
>>>>
>>>> Regards, DJX
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, Dec 6, 2016 at 8:52 AM -0500, "Aidan"
>>>> <aidan.smarttalk@xxxxxxxxx<mailto:aidan.smarttalk@xxxxxxxxx>> wrote:
>>>>
>>>> Well, sorry, I'm not so good always to describe these noises, but
>>>> there are too things. First if you startup the pc, jaws speaks
>>>> funny and it sound some what robotic, and that could so called be
>>>> fixed by disabling fast boot. Thanks I did now set the option to
>>>> background services. But the other noise wich I can keep hering as
>>>> I type is a humming sort of noise. Or something that sound like a
>>>> cat spinning, just a bit softer. Don't know if this is windows10
>>>> spisific issues, I am not on 7 as I don't use sonar on this
>>>> machine. I did search focusrite but found only the things I tried so far.
>>>>
>>>> On 05/12/2016, DJX <megamansuperior@xxxxxxxxxxx> wrote:
>>>>> Hi, can you describe the noise? Is it a hum, or a high-pitch noise?
>>>>> A little more details please.
>>>>> Also, you should not change that setting to programs from
>>>>> background services, as that actually hurts audio performance, it
>>>>> doesn't help it at all! driver comunication is handled through
>>>>> background swrvices, especially in later versions of windows.
>>>>> This is another fine example of audio myths that fly as facts in
>>>>> the internet :)
>>>>>
>>>>>
>>>>> Regards, DJX
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Dec 5, 2016 at 8:56 AM -0500, "Aidan"
>>>>> <aidan.smarttalk@xxxxxxxxx<mailto:aidan.smarttalk@xxxxxxxxx>> wrote:
>>>>>
>>>>> Hello.
>>>>> I am using a scarlet 2i4, and I keep having a funny noise when I
>>>>> turn on or restart. I'm running windows10 32bit and I did disable
>>>>> fast boot, and under system settings set the skedual option for
>>>>> programs instead of background services. But stil the sound don't
>>>>> go. If I disconnect it and reconnect, it sometimes works, but then
>>>>> the noise comes back after restarting again or awake from sleep moad.
>>>>> Any ideas?
>>>>>
>>>>> Aidan
>>>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>>> To leave the list, click on the immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>>> If this link doesn't work then send a message to:
>>>>> ddots-l-request@xxxxxxxxxxxxx
>>>>> and in the Subject line type
>>>>> unsubscribe
>>>>> For other list commands such as vacation mode, click on the
>>>>> immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>>>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Facebook: m.facebook.com/aidan.maher92
>>>> Skype: andries4451
>>>> Twitter: smarttalk7
>>>> Audioboo:
>>>> www.audioboo.com/DjSpotlight<http://www.audioboo.com/DjSpotlight>
>>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>> To leave the list, click on the immediately following link:
>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>> If this link doesn't work then send a message to:
>>>> ddots-l-request@xxxxxxxxxxxxx
>>>> and in the Subject line type
>>>> unsubscribe
>>>> For other list commands such as vacation mode, click on the
>>>> immediately following link:
>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>>>
>>>>
>>>
>>>
>>> --
>>> Facebook: m.facebook.com/aidan.maher92
>>> Skype: andries4451
>>> Twitter: smarttalk7
>>> Audioboo: www.audioboo.com/DjSpotlight PLEASE READ THIS FOOTER AT
>>> LEAST ONCE!
>>> To leave the list, click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>> If this link doesn't work then send a message to:
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> unsubscribe
>>> For other list commands such as vacation mode, click on the
>>> immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>>
>>>
>>
>>
>> --
>> Facebook: m.facebook.com/aidan.maher92
>> Skype: andries4451
>> Twitter: smarttalk7
>> Audioboo: www.audioboo.com/DjSpotlight PLEASE READ THIS FOOTER AT
>> LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>>
>
>
> --
> Facebook: m.facebook.com/aidan.maher92
> Skype: andries4451
> Twitter: smarttalk7
> Audioboo: www.audioboo.com/DjSpotlight PLEASE READ THIS FOOTER AT
> LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
--
Facebook: m.facebook.com/aidan.maher92
Skype: andries4451
Twitter: smarttalk7
Audioboo: www.audioboo.com/DjSpotlight
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
ËD@Lrã,@LãB:%y«Þ¶¥Ë\'$¢{az)¦yصér~e£§X§×h¶Ékz«²×ëyéb²Û(®.n7¶éì¹»®&Þ!ûaÉbGhzÉíÂ䶧±éÝjg¬±¨¶]¢Û%ê®zË_ç¥Ël¢¸Ø§¶¹¸ÞrÙbër¥ë§²æìr¸xZ+¢Ø^®X¬µÊ&©Ý²
«/iÆæ¡×'$¢{az)¦yصér~e£§X§×h¶Ékz«²×ëyéb²Û(®.n7µöª¢»Ö¦zËëhuÚ-²Zު笵úÞzX¬¶Ê+©Ý{ay+ç-)Þ·*^}ª
