Maby I'll probaly just get a external and use that for my apps or something or sonar backups. and my net book or something untill i can get another computer for my every day normal use, like for team talk, or something?
Dominique: Writing via Thunderbird in Vinux. On 09/29/2010 08:06 AM, Bryan Smart wrote:
You can do this by partitioning your hard drive. Partitioning the hard drive is a process that separates it in to sections. For example, instead of a single 500GB hard drive that shows up as your C drive in Windows, you'd have 2 250GB drives that show up as C and D. These aren't two actually separate drives, but Windows treats them as two separate drives. Once your drive was partition, you could install an operating system on each one of the partitions. For example, you could install Windows 7 on both partitions, using the version on the first partition for your every day computing tasks, and the version on the second partition strictly for audio. Each copy of Windows would be entirely separate, including the programs that were installed, the drivers that were installed, the settings, etc. When you turn on your computer or reboot, a menu appears where you select which version of Windows to start. It is better, and easier to setup, if you were to use separate hard drives for each operating system, and just insert the drive with the OS that you'd like to use. That isn't particularly easy on a laptop, though. Desktop people usually do the multiple hard drive approach, while laptop people partition and install mutliple OSes on multiple partitions. Having said all of that, this isn't a setup that I'd suggest that a novice perform. There are many complicated steps. You should be able to find a local computer geek, though, that can help you with something like this. Bryan -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dominique Sent: Tuesday, September 28, 2010 6:55 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not able to read certain things in sonar. And How would someone do this sort of thing? This is the only laptop I have. so, that's not a bad Idea brian! Dominique: Writing via Thunderbird in Vinux. On 09/25/2010 11:14 AM, Bryan Smart wrote:Also, having a dedicated partition (or computer) for Sonar is the rule for anyone that desires anything like professional results. All of this software, not just Jaws and the scripts, are extremely picky pieces of software that must have everything set just so, only work well with specific combinations of software versions, etc. Anyone attempting to multipurpose an audio computer with office functions etc is setting themselves up for a life more full of troubleshooting conflicts than making music. Bryan -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir Sent: Saturday, September 25, 2010 6:08 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not able to read certain things in sonar. Not seeing that here at all. HSC is working as advertised. Think there's something goofy going on on your system as you are the only one who's reported that particular issue. Time for a reinstall I think. Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ ________________________________ From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Omar Binno Sent: 25 September 2010 10:43 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not able to read certain things in sonar. Correct, Steve. Also, with Sonar 8.5, it seems that you can't use a lot of the hsc shortcut keys. You have to activate a particular command by getting to it from the menus. ----- Original Message ----- From: Steve Wicketts<mailto:steve.wicketts@xxxxxxxxxxxxxxxx> To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, September 25, 2010 4:56 AM Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not able to read certain things in sonar. Cameron, Forgive me if I'm stating the obvious with HSC, have you used it before, as I always go to synth rack (Alt 8) arrow down to the particular synth I want,press P and then start using hot spot clicker. Steve W From: "Cameron"<cameron@xxxxxxxxxxxxxxxxx> To:<ddots-l@xxxxxxxxxxxxx> Sent: Saturday, September 25, 2010 4:56 AM Subject: [ddots-l] hsc build 198 did not fix my issue and I am still not able to read certain things in sonar. > Hello everyone. I installed hsc build 198 this evening and it did not fix > my issue. I am still getting the window not found, hot spot failed > message > whenever I try to use hsc sets with any of the soft synths included with > sonar 8.5 producer. I made sure the proper hsc set was loaded, and I also > tried picking things from the list instead of using the hsc command and I > just get the same error message. > > On Sunday, I'm going to have a friend help me install a seperat partition > on > my system drive that will be for sonar only. until then, is anyone else > experiencing this? > > I don't get it. I'm using the latest hsc sets, latest version of jsonar, > latest version of jaws ten, all my display settings are correct, yada yada > yada... and there don't appear to be any dialogue boxes etc blocking the > dimension pro window for example, at least nothing that the virtual viewer > or jaws cursor can see. > > I can see the presets box with the jaws cursor and the pc cursor in > dimension pro, rapture le, etc so why doesn't the virtual mouse click that > hsc does work? > > Also, for some reason, jaws is not reading things in lists and it's not > reading page tabs in dialogue boxes etc. it just says tab, when it should > say general or drivers etc. > > This is only happening in sonar though, even after a total reinstall of > everything. > > Anyone have any explanations or further suggestions? > > This happens with both JSonar and the latest version of ct. I've tried > both. > > Thanks, > > Cameron. > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, > click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > send a message, to > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > > > __________ Information from ESET NOD32 Antivirus, version of virus > signature database 5477 (20100924) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > __________ Information from ESET NOD32 Antivirus, version of virus signature database 5477 (20100924) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faqPLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq