[ddots-l] Re: hsc build 198 did not fix my issue and I am still not able to read certain things in sonar.
- From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 25 Sep 2010 11:27:48 -0400
Hi. even selecting the commands from the list and hitting enter does
nothing.
And, last night, I installed the latest nvdia drivers, then uninstalled and
reinstalled video intercept, reinstalled JSonar and hsc build 198, and
nothing changed.
Cameron.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: Saturday, September 25, 2010 6:49 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Phil,
I had uninstalled hsc and reinstalled it and had the same issue. Cameron
also reported the same thing in his original post. My "window not found"
issue was resolved when I pressed p on the particular synth in the
synthrack, but shortcut keys don't work in some of the synths, (VSampler,
for example.) I have to access commands by going to the menu and hitting
enter.
----- Original Message -----
From: Phil Muir <mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, September 25, 2010 6:07 AM
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Not seeing that here at all. HSC is working as advertised. Think there's
something goofy going on on your system as you are the only one who's
reported that particular issue. Time for a reinstall I think.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: 25 September 2010 10:43
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Correct, Steve. Also, with Sonar 8.5, it seems that you can't use a lot of
the hsc shortcut keys. You have to activate a particular command by getting
to it from the menus.
----- Original Message -----
From: Steve Wicketts <mailto:steve.wicketts@xxxxxxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, September 25, 2010 4:56 AM
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Cameron,
Forgive me if I'm stating the obvious with HSC, have you used it before, as
I always go to synth rack (Alt 8) arrow down to the particular synth I
want,press P and then start using hot spot clicker.
Steve W
From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, September 25, 2010 4:56 AM
Subject: [ddots-l] hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
> Hello everyone. I installed hsc build 198 this evening and it did not fix
> my issue. I am still getting the window not found, hot spot failed
> message
> whenever I try to use hsc sets with any of the soft synths included with
> sonar 8.5 producer. I made sure the proper hsc set was loaded, and I also
> tried picking things from the list instead of using the hsc command and I
> just get the same error message.
>
> On Sunday, I'm going to have a friend help me install a seperat partition
> on
> my system drive that will be for sonar only. until then, is anyone else
> experiencing this?
>
> I don't get it. I'm using the latest hsc sets, latest version of jsonar,
> latest version of jaws ten, all my display settings are correct, yada yada
> yada... and there don't appear to be any dialogue boxes etc blocking the
> dimension pro window for example, at least nothing that the virtual viewer
> or jaws cursor can see.
>
> I can see the presets box with the jaws cursor and the pc cursor in
> dimension pro, rapture le, etc so why doesn't the virtual mouse click that
> hsc does work?
>
> Also, for some reason, jaws is not reading things in lists and it's not
> reading page tabs in dialogue boxes etc. it just says tab, when it should
> say general or drivers etc.
>
> This is only happening in sonar though, even after a total reinstall of
> everything.
>
> Anyone have any explanations or further suggestions?
>
> This happens with both JSonar and the latest version of ct. I've tried
> both.
>
> Thanks,
>
> Cameron.
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 5477 (20100924) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5477 (20100924) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
