[ddots-l] Re: intro and question about synths
- From: D!J!X! <megamansuperior@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 6 Nov 2014 17:09:27 -0500
There are quite a few synths for dance, and some are multipurpose. A great
synth that gives you ability to edit and use presets is Omnisphere, it has a
40GB library, plus expansions/extra presets you can buy for it. Steve did an
awesome job at spotting it up, and you can have full access to the UI
through his HSC set.
Other synths that are usable include z3ta+ (included with sonar), z3ta+2
(separate purchase, but usable), Sylenth1 (I'm working on a set for this
synth), Massive (Steve made an HSC that let's you load presets), FM8 (Steve
has a set for this as well), Spire (I'm working on a set for that), Predator
(use presets and edit through inspector), Blue2, and a few others.
Take a look at vipaudioaccess.com to see what Steve has done and what else
is available. I hope to have some stuff up there soon as well, once I figure
out a few things around here.
HTH, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Jorge Paez
Sent: Wednesday, November 05, 2014 11:14 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: intro and question about synths
Well, I'm just going to start learning this.
I was never able to use the synth on the mac so never got to play with it at
all.
I'd like to do both eventually though, but what would be best to start with?
On 11/5/14, D!J!X! <megamansuperior@xxxxxxxxxxx> wrote:
> Are you more of a presets guy, or do you do your own sounds/tweaking?
>
> D!J!X!
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Jorge Paez
> Sent: Wednesday, November 05, 2014 10:27 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: intro and question about synths
>
> dance mainly.
> At leastthat's what the midi is going to be used for.
> Also, soundtracks.
>
>
>
>
> On 11/5/14, D!J!X! <megamansuperior@xxxxxxxxxxx> wrote:
>> Hi, you can use vanguard with sonar to access presets, and the last
>> version I tried, the parameters were accessible from the inspector
>> view. I was going to do HSC sets for it, but then I replaced vanguard
>> (unintentionally) with Sylenth1, and that's the one I'll be working
>> on soon!
>> What kind of genre will you be recording/producing for? That'll help
>> in determining what kind of synths to recommend.
>>
>> HTH, D!J!X!
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx
>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Jorge Paez
>> Sent: Wednesday, November 05, 2014 5:11 PM
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] intro and question about synths
>>
>> Hi all:
>> My name is Jorge.
>> I've been in performing arts for 18 years, music for 15, and I'm
>> planning on getting a workstation pretty soon for both my composition
>> and audio recording.
>> My question is, are there any synths I can buy that are accessible?
>> I come from a Mac background, and my last attempt was a failure--I
>> was trying to learn Logic which was inaccessible, and Vangard, which
>> was completely inaccessible.
>> Does anyone know whether you can use Vangard inSonar and if its
>> completely accessible?
>> Also, which other synths,from reFX are accessible?
>>
>>
>> Thanks,
>>
>> Jorge
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>>
>
>
> --
> Jorge A. Paez
>
> LinkedIn: http://www.linkedin.com/in/jorgeapaez11994
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
--
Jorge A. Paez
LinkedIn: http://www.linkedin.com/in/jorgeapaez11994
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
