[ddots-l] Re: over driven tracks

  • From: Jörgen Hansson <hansson.jogge@xxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Tue, 23 Mar 2010 21:48:26 +0100

i there!
Well, I haven't seen something in sonar which could be cranking up the volume 
like that before, so for me it sounds kind of strange, but if you have sighted 
assistans, then you can let him check what the problem is.
Regards,
Jörgen Hansson!
Tel +46 703-601296
www.jorgenhansson.com
skype: djtropical4532
  ----- Original Message ----- 
  From: Dave Hillebrandt 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Tuesday, March 23, 2010 8:48 PM
  Subject: [ddots-l] Re: over driven tracks


  Hi Jorgen, I am using the m-audio fast track ultra and would be one area that 
I would consider though don't think I ever entered its software. It is 
generally not too accessible so I usually avoid it. Is certainly possible 
though. I was just thinking that perhaps I had hit something in sonar's 
software that cranked the master volume all the way up. If not that, pretty 
much has to be the interface. Thanks, Dave
    ----- Original Message ----- 
    From: Jörgen Hansson 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Tuesday, March 23, 2010 3:07 PM
    Subject: [ddots-l] Re: over driven tracks


    Hi dave!
    isn't it so that you have accedentally done something within the control 
pannel of the sound card it self? what kind of sound card are you using?
    have you tried listening to some other playable program which you're using 
to listen to music with?
    Regards,
    Jörgen Hansson!
    Tel +46 703-601296
    www.jorgenhansson.com
    skype: djtropical4532
      ----- Original Message ----- 
      From: Dave Hillebrandt 
      To: ddots-l@xxxxxxxxxxxxx 
      Sent: Tuesday, March 23, 2010 8:01 PM
      Subject: [ddots-l] over driven tracks


      Hi All, Have obviously done something in settings unknowingly and now any 
projects they I have done are all overdriven. Any ideas what might do that. Did 
check interface and that appears to be normal so am thinking something in sonar 
that controls overall volume. Nothing I do seems to effect this and the input 
and ouputs appear to be going to the correct device. Any suggestions 
appreciated as where to check and where would I find overall volume for project 
as a place to start first. Thanks, Dave

Other related posts: