[ddots-l] problem with ProjectMix
- From: "Charles Marston" <rumbero73@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 21 Mar 2011 22:16:04 -0400
Doug:
So, if I understand correctly, the problem you are having is only with new
projects? When you start Sonar, does it open with one of the triple A
templates? If it does not, try going into the open menue and select one of the
triple A templates. Then, check that you have a master bus and that its output
column says "output is M-Audio Asio ProjectMix analogue out 1-2.
From: Doug Daniels
Sent: Monday, March 21, 2011 9:47 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Retreeving matterial
Charles, thanks. That doesn't seem to be the problem. Because when I load up a
project that I did in SONAR, last November, and I turn on input echo and arm,
the microphone works, coming through the project Mix. I can hear myself in the
speakers, or headphones. I just can't make a new project, and have anything get
through to SONAR. Or, maybe I am not thinking about it right. I am very new at
computers. I only got my first computer ever a little over a year ago. Now I
just got this other one with all the recording stuff in it.
Thanks for your suggestions. I will welcome any help you can give me. Doug.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Charles Marston
Sent: Monday, March 21, 2011 12:25 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Retreeving matterial
Doug:
You can press inser plus F11 then arrow down until you get to the ProjectMix
control pannel. You will need to tab until you get to the double left click
button. That should open the ProjectMix control pannel. You will need to use
the JAWS curser to go through the screen. It is not very accessible because
sometimes is hard to know which values go with which setting. See if you can
get some sighted help.
> From: douglasneal@xxxxx
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Retreeving matterial
> Date: Mon, 21 Mar 2011 11:24:45 -0700
>
> Cris, how would I get to the place where I could look at the control panel.
> And what would I look for, and what should I do there?
> Doug.
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
> Behalf Of Chris Smart
> Sent: Sunday, March 20, 2011 9:21 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Retreeving matterial
>
> Does the Project Mix have control pannel software you might need to
> adjust?
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
Other related posts: