Hi all Can we use ct with windows eyes? Richard Beausoleil PRODUCTIONS BEAUSOLEIL Arrangements musicaux Studio multi-pistes Démo vocal Tél : (514) 924-0411 Courriel : prodsoleil@xxxxxxxxxxx----- Original Message ----- From: "D!J!X!" <megamansuperior@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Friday, October 12, 2007 4:22 PM Subject: [ddots-l] Re: revised list of sonar things to fix
Yea I understand that, I'm just reffereing to the refferences that the listmakes to this works with jaws but not with windows eyes etc etc, wouldn'tsuggesting keyboard alternative for those things be enough, as it would thennot matter what screen reader you were using? HTH, D!J!X! -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of Phil Muir Sent: Friday, October 12, 2007 2:19 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: revised list of sonar things to fixNo they wouldn't. Remember that if we are having to use screen reader mouseclicks to click on something then, that's an accessibility issue. Also, sometimes information is being sent to a control surface which both CT and JSonar utilise. However, what if your not using Jaws or, a screen readersuch as Window Eyes that doesn't support scripting like Jaws does? You arethen in the position of not being able to utilise control surface support. Remember, we are looking at accessibility for all screen reader users, not just JFW ones.Finally remember that when you pres the tab key in Sonar in order to access the track inspector, jaws as actually clicking on the screen with the mouseto do this. If Sonar had full functionality with keystrokes then, we wouldn't need to script as much as we do and ultimately, this would makeusing Sonar with Jaws or whatever screen reader, a much snappier experience.Regards, Phil Muir P J Muir Productions Music And Audio Production URL: www.philmuir.com/ Band website: www.steelstringmusic.co.uk/ Band my Space Site: www.myspace.com/steelstringmusic ----- Original Message ----- From: "D!J!X!" <megamansuperior@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Friday, October 12, 2007 6:17 PM Subject: [ddots-l] Re: revised list of sonar things to fixWouldn't those last few suggestions which involve screen reader specificsbea little too much? I mean they are willing to work with the accessibilitypart of the program but when it comes to them knowing or having to knowhoweach product of accessibility works, it could become too much... Butmaybeit isn't, I'm just saying.. :) D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]OnBehalf Of HF Sent: Friday, October 12, 2007 10:47 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] revised list of sonar things to fix Peruse this list and tell me if there are any errors. I'm going to submit them today to Brandon. Thanks1. Keyboard support for some of the newer plug-ins The new linear plug-insare a bit of a nightmare for screen reader users. For example, in the Linear EQ, there is a graph which you need to click on in order to add a label for a given frequency band. As usual, there isn't a tab order to speak of in that plug-in. Perhaps a group of radio buttons would bebettermeaning that, you could have 20 radio buttons for band selection in the plug-in. You would choose which radio button you wanted to access for a particular band then, tab over to the gain, frequency q etc.for the bandthat has focus. When a particular radio button is selected, only the data for that band would be displayed on screen. Sighted people would probablylike this feature too as currently, when you add labels for each band in order to work on a given part of the frequency spectrum the screen can become quite busy. A great new feature that Sonar is touting is theabilityto solo each individual band. Cannot do that from the keyboard. 2. Audio Scrubbing is not usable with a control surface, as the scrubcursordoesn't track properly in Sonar. Kind of usable with the mouse although, still not great. What's the point in purchasing an FW1884 if I can't useoneof the main features of it in Sonar, namely, scrubbing. Also, no keyboardsupport for it yet. At least let me assign it to either the mouse wheel or a mod wheel on a control surface. Thereareno keybindings for it. 3. No Accessibility In The Clips Pane. Currently a user has to drag various panes apart in order to access the clips pane. Perhaps a clip view, similar in functionality to the eventviewwould be great. Or at least a keystroke to find the nearest zero crossing dependent upon the selection that I made with the from and through timewiththe f9 and f10 keys. 4. Automations shapes in the bus view Shapes that are recorded in the buss view, aren't accessible for us atall.They do not appear anywhere that we can get to. It would be great if shapes that are recorded in the buss view were also accessible in the event view. At least that way, we could then go intotheevent view and delete them. Here is the nightmare scenario, you just did akiller fade out on the master bus so you saved it. You listen back acoupledays later and it just wasn't right. Now what, you can't delete that automation. 5. Real world values in the inspector directly from the plug in. The only one that does this successfully is the sonitus EQ. Otherwise, all we getarepercentage values. When using a compressor, what ratio does 43 percent equate to exactly. Hard to tell. 6. Editing envelopes as Midi values This was implemented in Cakewalk 9.03 but this feature is no longer available. If the envelope is being described by a series of MIDI controller values (whichiswhat is really happening anyway if you use a control surface to do your automation), you'll be able to modify the individual events within theEventView. Alternatively, it would be nice to set nodes using a surface that describe minima and maxima then get Sonar to join them up usinguser-selectable lines/curves - adjusting the starting or ending node wouldthen cause the line/curve to be redrawn. 7. Need to be able to see and edit MIDI note off messages in the EventView.8. Unable to re-order tracks using keystrokes. 9. Unable to change ordering of plug-ins within a strip's FX Bin usingthekeyboard 10 No Keyboard Support For Soloing Busses. 11. No keyboard keystroke to bring up the context menu that allows the insertion of new sends, etc. 12. Have to use a mouse to gain focus in the Console View. 13. Unable to read effects names from the FX Bin if using Window Eyes - works with Jaws. 14. Have to use a mouse to move to the Track Inspector when using Window Eyes -OK with Jaws. 15. Unable to determine which track/bus I'm on when using Window Eyes and keyboard commands. This works better in Jaws, but is not 100% reliable. 16. Can't navigate the Event View using Window Eyes. 17. Have to use a mouse to get into the Plug In Manager. 18. Can't access the Piano Roll View. ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq -- No virus found in this incoming message. Checked by AVG Free Edition.Version: 7.5.488 / Virus Database: 269.14.8/1064 - Release Date: 2007-10-11 15:09
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq