[ddots-l] Re: waive profiler in sonar
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 23 Apr 2006 17:33:11 -0400
Wave profiler is only there when using MME drivers.It's not there
when using asio drivers.
Jean
----- Original Message -----
From: <fioresq1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 5:19 PM
Subject: [ddots-l] Re: waive profiler in sonar
> the last button on the genral page is asio pannel and before that isbuffer
> size, Alt+w does nothing. Thanks, are you using sonar 4?
> ----- Original Message -----
> From: "Ilkster" <The_Ilkster@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Sunday, April 23, 2006 4:58 PM
> Subject: [ddots-l] Re: waive profiler in sonar
>
>
> > On the general page of the audio options dialog, Wave Profiler is the
last
> > button before the OK button. Make sure you're on the general page of
this
> > multi-page dialog, and tab through until you land on wave profiler. By
> the
> > way, Alt+W is the hotkey for wave profiler. When in the general page,
> just
> > press alt+w and that will start wave profiler.
> >
> >
> > ----- Original Message -----
> > From: <fioresq1@xxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Sunday, April 23, 2006 4:12 PM
> > Subject: [ddots-l] waive profiler in sonar
> >
> >
> > >I am using sonar 4 with caketalking. In reviewing the tutorial it
> mentions
> > > a waive profiler. Unfortunately, I can't seem to loacte it in the
audio
> > > options. Any help would be appreciated. John Fioravanti
> > > ----- Original Message -----
> > > From: "Rod" <roddj12@xxxxxxxxxxx>
> > > To: <ddots-l@xxxxxxxxxxxxx>
> > > Sent: Sunday, April 23, 2006 4:10 PM
> > > Subject: [ddots-l] Re: when should one record mono or stereo?
> > >
> > >
> > >> thanks, phill.
> > >>
> > >> Rod
> > >> ----- Original Message -----
> > >> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
> > >> To: <ddots-l@xxxxxxxxxxxxx>
> > >> Sent: Sunday, April 23, 2006 12:24 PM
> > >> Subject: [ddots-l] Re: when should one record mono or stereo?
> > >>
> > >>
> > >> > Hi Rod!!
> > >> >
> > >> > I always record items such as kick, snare, guitars, vocals and bass
> > > guitar
> > >> in mono. Having said
> > >> > that, if I had a drum or, keyboard sound that was stereo then, I
> would
> > >> record 2 channels of it. In
> > >> > other words, I would record it in stereo but, not using a stereo
> track.
> > >> This is because, recording
> > >> > the sound as two mono tracks, gives me more control over it as I
have
> > > two
> > >> panning controls and
> > >> > therefore, can decide how much of the stereo spread the sound takes
> up
> > > in
> > >> the mix. For example, if
> > >> > I had a keyboard coming into my sound card then, I would choose the
> two
> > >> mono inputs from the desk
> > >> > and sound card for that track. So, I would chose, MOTU 1 for the
> left
> > >> channel, and MOTU 2 for the
> > >> > right channel, rather than choosing the stereo input.
> > >> >
> > >> > If the sound that I am using is a DXi instrument then, I leave it
as
> a
> > >> stereo track.
> > >> >
> > >> > Regards, Phil Muir
> > >> >
> > >> > P J Muir Productions, Music and audio production,
> > >> > Mixing, Mastering: www.philmuir.com/
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Rod" <roddj12@xxxxxxxxxxx>
> > >> > To: <ddots-l@xxxxxxxxxxxxx>
> > >> > Sent: Sunday, April 23, 2006 8:07 AM
> > >> > Subject: [ddots-l] when should one record mono or stereo?
> > >> >
> > >> >
> > >> > > Can the pros chime in on this one, please?
> > >> > > As some of you know, I am not a pro, but I have been fortunate to
> mix
> > >> some
> > >> > > decent mixes, however, there is a lot of room for improvement.
> > >> > > Here is my dilemma below:
> > >> > >
> > >> > > I have the tendency to record all of my tracts in stereo, and mix
> > >> > > most
> > >> of
> > >> > > them this way. My question is this: when should I record a tract
> > > stereo,
> > >> or
> > >> > > mono? I know that stereo sounds better, that's why I recorded as
> > >> > > such:
> > >> but
> > >> > > is this a good practice? I sometimes end up converting my kick
into
> > >> mono,
> > >> > > anyway.
> > >> > > Yet, what are some tracts or instruments that you can say are
> > > generally
> > >> > > should be recorded
> > >> > > as a mono signal? Drums, bass, etc?
> > >> > > I always record live guitar as mono, and vocals also.
> > >> > > I use the motif for tracking.
> > >> > >
> > >> > > Rod
> > >> > > ** To leave the list, click on the immediately-following link:-
> > >> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > >> > > ** If this link doesn't work then send a message to:
> > >> > > ** ddots-l-request@xxxxxxxxxxxxx
> > >> > > ** and in the Subject line type
> > >> > > ** unsubscribe
> > >> > > ** For other list commands such as vacation mode, click on the
> > >> > > ** immediately-following link:-
> > >> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > >> > > ** or send a message, to
> > >> > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> > >> > >
> > >> > >
> > >> > ** To leave the list, click on the immediately-following link:-
> > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > >> > ** If this link doesn't work then send a message to:
> > >> > ** ddots-l-request@xxxxxxxxxxxxx
> > >> > ** and in the Subject line type
> > >> > ** unsubscribe
> > >> > ** For other list commands such as vacation mode, click on the
> > >> > ** immediately-following link:-
> > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > >> > ** or send a message, to
> > >> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> > >> >
> > >> >
> > >> ** To leave the list, click on the immediately-following link:-
> > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > >> ** If this link doesn't work then send a message to:
> > >> ** ddots-l-request@xxxxxxxxxxxxx
> > >> ** and in the Subject line type
> > >> ** unsubscribe
> > >> ** For other list commands such as vacation mode, click on the
> > >> ** immediately-following link:-
> > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > >> ** or send a message, to
> > >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> > >>
> > >
> > > ** To leave the list, click on the immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > ** If this link doesn't work then send a message to:
> > > ** ddots-l-request@xxxxxxxxxxxxx
> > > ** and in the Subject line type
> > > ** unsubscribe
> > > ** For other list commands such as vacation mode, click on the
> > > ** immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > > ** or send a message, to
> > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> > >
> > >
> >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
