Nice catch: thanks best wishes. Tim Burgess On 8 Jul 2010, at 04:31 AM, "D!J!X!" <megamansuperior@xxxxxxxxxxx> wrote: > Hello peoples, for those of you who use z3ta+, or never bothered to use it > because of the bank change problem found with the track properties, here's a > possible way to fix it! > So, DJX, what are you talking about? What's the problem with z3ta+? I haven't > noticed anything wrong with the thing... > The problem is that if you use the track properties or bank/patch boxes to > try and switch z3ta+ to any of the addition 5 or 6 preset banks, the > instruments names change, however the instruments themselves do not, instead, > you still get the sounds from the first bank0, even though the name itself > changes. Basically you're missing out on like 5 banks of presets! > OK cool, more presets! So how do i fix it and get these babies? > The fix is Simple. Note that this worked for me on sonar8.5, i didn't have > this prob in sonar8.3, so not sure if it'll work for you, but i think it will. > 1. Open Sonar, if a project opens up, close it with ctrl+f4. > 2. press alt+l, then M to launch the plug-in manager. > 3. When the plug-in opens, in the categories section, go to VST Instruments. > 4. Tab over to the registered plugins list and press z for z3ta+. > 5. Press alt+p for the properties dialog. > 6. When it opens, tab over till you find the box that says "Translate > Bank/patch changes" and check it. Press ok to close the dialog. > 7. After a few seconds, use the mouse cursor for your screen reader, go to > the top of the screen, down arrow once or twice till you hear amongs other > things, the various categories in the plug-in window, such as directX audio > effects, VST Audio Effects, DirectX Instruments, VST Instruments etc. > 8. Once you find one of these, find one of those words using left and right > arrows, and left-click on them once. The plug-in manager window should gain > focus again. Shit+Tab over to the close button and press enter. > 9. Now open a new project, insert z3ta+, and check out the bank/patch in the > track properties! > 10. Remember not to use an instrument track, use separate midi/audio tracks. > > So there you have it, this worked for me, hope it works for you. Please note, > don't go doing this for everything on your system, some synths like dimension > pro and rapture don't have this bank/patch change capability, you have to use > their built-in program browsers. Also, for some synths that do use bank/patch > change, checking this box mmight actually make things worse or cause no > respond. You've been warned! LOL > > Hope this helps some of you guys, I didn't have this problem with z3ta+ till > i upgraded to sonar8.5.2. It use to work fine in sonar 8.3. > > HTH, D!J!X!