[duxuser] Re: Installing a Blazer with Vista:
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Tue, 24 Mar 2009 18:09:29 -0000
Hi Don,
You need to identify which USB Port the USB to Parallel adaptor has
installed itself on. This can be really tricky, especially as some
devices will install an LPT device as opposed to a USB one.
Then you can "Add Printer", a Generic/Text only printer, to the above
port.
Finally you set DBT to send to "Printer" in Global Embosser Setup and
select the Generic/Text Only printer you have just installed.
Works here, but the first part can be a real pain.
George.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Don Moore
Sent: 24 March 2009 18:03
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Installing a Blazer with Vista:
George, you mentioned on another list that there was some set-up
involved with installing a Blazer using a USB to parallel adapter.
What actually would I need to do to get the computer to recognize the
printer? Thanks.
Other related posts:
