[duxuser] Re: Installing a Blazer with Vista:
- From: "Don Moore" <don.moore48@xxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Tue, 24 Mar 2009 14:10:51 -0400
Great!! Thanks.
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Tuesday, March 24, 2009 2:09 PM
Subject: [duxuser] Re: Installing a Blazer with Vista:
Hi Don,
You need to identify which USB Port the USB to Parallel adaptor has installed
itself on. This can be really tricky, especially as some devices will install
an LPT device as opposed to a USB one.
Then you can "Add Printer", a Generic/Text only printer, to the above port.
Finally you set DBT to send to "Printer" in Global Embosser Setup and select
the Generic/Text Only printer you have just installed.
Works here, but the first part can be a real pain.
George.
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Don Moore
Sent: 24 March 2009 18:03
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Installing a Blazer with Vista:
George, you mentioned on another list that there was some set-up involved
with installing a Blazer using a USB to parallel adapter.
What actually would I need to do to get the computer to recognize the
printer? Thanks.
Other related posts:
