Scott, the top-of-form offset is menu 30. So you want 30.3 or 30.4 or whatever looks right to you. Susie Stageberg Project ASSIST with Windows Iowa Department for the Blind -----Original Message----- From: Scott Blanks [mailto:scottsjb@xxxxxxxxx] Sent: Wednesday, August 06, 2003 6:02 PM To: duxuser@xxxxxxxxxxxxx Cc: blindtech@xxxxxxxxxxxxxxx Subject: [duxuser] Juliet Pro and Duxbury question Hello listers, I'm looking for some information about the Juliet Pro embosser. I am using it in conjunction with the Duxbury Translator version 10.3. The problem I am currently encountering is that the braille is too close to the top of pages when embossing. I have gone through the process of adjusting the perf skip by entering menu one and pressing 11.1. However, this didn't alleviate the problem so I was able to locate information that suggested I might need to change the top of form setting in tenths of an inch, but I'm unclear on whether that is the same thing I did with 11.1 or if it is a different setting. Can anyone help? Also, if there are any adjustments that need to be made on the Duxbury side of things, could you please pass those along? Thanks, Scott * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *