[duxuser] Re: Juliet users, have you found a way...
- From: "Janna Spears" <jrspears@xxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 22 Sep 2005 10:49:48 -0500
Thank you all so much, Jana
----- Original Message -----
From: Robert Jaquiss
To: duxuser@xxxxxxxxxxxxx
Sent: Thursday, September 22, 2005 10:11 AM
Subject: [duxuser] Re: Juliet users, have you found a way...
Hello Janna:
I suggest that you contact ViewPlus Technologies, the company that makes
the Tiger embosser and ask about an instruction book. Their web site is:
http://viewplus.com
Regards,
Robert Jaquiss
----- Original Message -----
From: Janna Spears
To: duxuser@xxxxxxxxxxxxx
Sent: Thursday, September 22, 2005 9:25 AM
Subject: [duxuser] Re: Juliet users, have you found a way...
I am a new user of DBT. Well, I am very new to all of this. I have
recently been able to recieve Tiger Embosser but it has no instruction book,
where would I find one. Any help would be greatly appreciated. Jana
----- Original Message -----
From: David Holladay
To: duxuser@xxxxxxxxxxxxx
Sent: Thursday, September 22, 2005 10:00 AM
Subject: [duxuser] Re: Juliet users, have you found a way...
Davey:
What form size are you picking? If you are using the "11 inch wide paper"
(11.5 wide, 11 inches high), then our records say it can handle 42 characters
across. Our numbers have been rigorously checked by Enabling Technology.
I have some questions for you:
1) Are you using 11.5 inch by 11 inch paper?
2) Have you done anything to increase the horizontal density of embossing
(i.e. pack in more cells per inch)?
3) Do you think the Enabling numbers are wrong?
Now, some information for you.
The embossing characteristics of each embosser is controlled by the file
emb.elt in the main directory containing your DBT 10.5 software. You can change
this file with a text editor (such as Notepad or Wordpad). The beginning of the
file contains lots of documentation. Be aware that each update to DBT will
over-write this file, so save your changes in a safe place.
You can either create a new form size for your embosser, or modify an
existing one.
Once you have changed emb.elt, delete the old embosser configuration, and
then create a new one from scratch making use of your changes.
It you believe there is an error in this file, please e-mail me directly.
I hope this addresses all of your issues.
-- David Holladay
At 07:29 PM 9/21/2005, you wrote:
Hi guys,
This my first time here since we just bought a copy of DBT.
Have those of you using Juliets found a way to get more than 42
available spaces? We want our cake and eat it too. With MegaDots and Juliet
both being basically unaware from a Windows perspective, we can configure the
Juliet to have 40 character lines beginning in what would bbe cell 4. That way
we get a nice wide separation from the bindings. So far I've only experienced
that the maximum width is 42 characters and if we want 3 cells of left margin
then the most brailling room we have is 39 cells.
When I unchecked the "control sequences", it shows left margins as 1
and right as 56, but when I go back to the general tab, it only gives me 42, so
that work around didn't work.
I also tried to fool the system with extra wide paper. The numbers
worked right then, but it locked my machine up every time I then tried to
emboss with those settings.
Or do you all just succumb to 39 cells?
Thanks all.
D.H.
Davey Hulse, CEO
Braille Plus, Inc.
PO Box 3686
3276 Commercial Street SE
Salem, Oregon 97302
http://www.brailleplus.net
Phone: (503) 391-5335
Toll Free: (866) 264-2345
Fax: (503) 391-9359
Every Format. Every Day. And, Everything Right!
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Wednesday, September 21, 2005 4:53 PM
Subject: [duxuser] Re: need to know how (PLEASE HELP)
Hi Karina,
You may put DBT on your personally owned laptop as well for your own
use.
Your license is a single-user license, which essentially means that
only the licensed user can use it at any one time.
All the best,
George.
----------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Karina Gregory
Sent: 21 September 2005 23:51
To: duxuser
Subject: [duxuser] Re: need to know how (PLEASE HELP)
Hi George,
I'd like to put Duxbury on my laptop as well as on my home PC, is
this possible as I was under the impression that you can only have it on one
machine at a time?
Thanks.
Karina
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Tuesday, September 20, 2005 3:57 PM
Subject: [duxuser] Re: need to know how (PLEASE HELP)
Hi Theresa,
Place the Duxbury CD in the laptop CD drive, wait for it to
autorun, and follow the on-screen instructions from there.
The full process is described in more detail in the installation
guide that should have come with the original software.
George Bell.
------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of froggies outisland adventure
Sent: 20 September 2005 15:15
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] need to know how (PLEASE HELP)
I HAVE THE DUXBURY SOFEWARE ON MY COMPUTER FOR ABOUT 2 MONTHS
FOR MY 6 YEAR OLD AND NOW I HAVE A COMPUTER FOR HER ( LAPTOP) SO WE CAN DO HOME
WORK ON THAT. HOW DO I PUT IT ON THE LAP TOP SO WE CAN WORK ON IT FROM THERE.
THERESA
Other related posts:
