Hi Stephen,
I think at this point, a call to Sighted would be your best
bet.
However, I will try to locate my network port information
when I get back to the office.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen
Schmucker
Sent: 11 December 2005 18:47
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Networking Basic-d
Hi George,
I've told the embosser to obtain an ip automatically. I
then had the embosser print the page. It came back with an
ip of 192.168.1.210. The subnet and gateway, and tftp were
all there as well.
I then proceeded to ping the beast and damn, if I didn't
finally get a positive response. Hoooray!
What is the next step?
And, thanks hugely for you patience and help.
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Sunday, November 27, 2005 4:02 AM
Subject: [duxuser] Re: Networking Basic-d
Hi Stephen,
Please don't keep me in suspense, especially on a Sunday
morning before I've had breakfast! (Smile) Are you
working
now, or at least making some progress?
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen
Schmucker
Sent: 27 November 2005 02:52
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Networking Basic-d
Hi george,
Yes, the utility does have an ip option and it does allow
you to specify an ip.
When I tried that, it said "transfer complete. Your
suggestion of having to use a usb or parallel cable
answers
the question as to why I kept getting no ip. Thanks
again.
Much appreciated.
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Saturday, November 26, 2005 9:27 PM
Subject: [duxuser] Re: Networking Basic-d
Hi Stephen,
I'm at home right now, but as I recall, you can turn off
the DNS/DHCP
function. I just can't recall if you do this via the
Embosser's own
setup, or using the Embosser Utility.
You'll need to use a parallel or USB cable, but the
Utility has an IP
Address option in one of its two or three menus, so can I
suggest you
look at the Embosser utility?
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
Stephen
Schmucker
Sent: 27 November 2005 02:06
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Networking Basic-d
Hi George,
I tried pinging again after awhile and got request timed
out again. I
checked on the index and the ip had reverted back to
zeros.
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Saturday, November 26, 2005 7:37 AM
Subject: [duxuser] Re: Networking Basic-d
Next thing I'd try Stephen, would be to connect the
embosser direct to
your PC's network port, and try pinging the embosser
again. If it is
OK, then it perhaps points to a router issue, which is a
whole other
ball game.
If it fails, then there are two possibilities. 1) The
network cable
may be suspect, or perhaps crossover when it should be
straight
through. Or 2) you need to change the IP address.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
Stephen
Schmucker
Sent: 26 November 2005 03:59
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Networking Basic-d
Hi George,
Yes to both questions and I get a response back.
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Friday, November 25, 2005 5:26 PM
Subject: [duxuser] Re: Networking Basic-d
> Hi Stephen,
>
> O.K. the PC isn't seeing the embosser - obviously.
>
> Do you know the router's IP address, and can you ping
that
> OK?
>
> George.
>
> -----Original Message-----
> From: duxuser-bounce@xxxxxxxxxxxxx
> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
Stephen
> Schmucker
> Sent: 25 November 2005 22:10
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: Networking Basic-d
>
> Hi George,
>
> I downloaded the embosser utility. When I pinged the
IP, I
> got request timed out.
> ----- Original Message -----
> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
> To: <duxuser@xxxxxxxxxxxxx>
> Sent: Friday, November 25, 2005 12:41 PM
> Subject: [duxuser] Re: Networking Basic-d
>
>
>> Hi Stephen,
>>
>> You can download the Index Embosser Utility from
>> http://www.braille.se Click on the "Support" link,
and
>> then on the "Download Software" link. On that page
is
an
> "Embosser
>> Utility" link which expands. You want "english
version
> 2.17.5". Be
>> VERY careful how you use this program, as you can
> potentially wipe the
>> embosser firmware out if you are not careful.
>>
>> If you are in North America, you would probably be
best
> calling
>> Sighted Electronics who are the main dealers for the
> region. Tel:
>> 1-800-666-4883. They're on holiday right now, but
I'll
do
> what I can
>> here.
>>
>> The first test I would be inclined to do is a
"ping".
> This will tell
>> you if your system sees the Index regardless of what
> drivers, etc.,
>> are installed. To do this, click on Start, Run, and
then
> type cmd and
>> press enter.
>>
>> You should then be at what is essentially a DOS
prompt.
> Now
>> type:-
>>
>> Ping 192.168.1.203
>>
>> And press enter.
>>
>> You will know from the response whether or not your
system
> has
>> correctly pinged the embosser.
>>
>> Let me know how you get on, and we'll take it from
there.
>>
>> (Please bear in mind that I'm in the U.K. and 5
hours
> ahead of EST so
>> may not get back to you by return.)
>>
>> George.
>>
>>
>> ________________________________
>>
>> From: duxuser-bounce@xxxxxxxxxxxxx
>> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
Stephen
> Schmucker
>> Sent: 25 November 2005 15:48
>> To: duxuser@xxxxxxxxxxxxx
>> Subject: [duxuser] Re: Networking Basic-d
>>
>>
>> Hi George,
>>
>> I have the Index connected with its RJ45 connector
to
a router.
>>
>> When I did he he no buttons on the embosser, it gave
me an IP of
>> 192.168.1.203.
>>
>> I don't seem to have the embosser utility. Where
can
I download
>> it?
>>
>> I am running WinXP SP2.
>>
>> I set up the printer on the computer and gave it the
above IP.
>>
>> Thanks for your patience and help.
>>
>> ----- Original Message -----
>> From: George Bell
>> <mailto:george@xxxxxxxxxxxxxxxxxxx>
>> To: duxuser@xxxxxxxxxxxxx
>> Sent: Friday, November 25, 2005 5:43 AM
>> Subject: [duxuser] Re: Networking Basic-d
>>
>>
>> Hi Stephen,
>>
>> I'm afraid I'll need a little more information.
>>
>> How exactly do you have the Index connected?
>> Are you using it's RJ45 network connection? If so,
have
> you
>> given the actual embosser itself an IP address using
the
>> Index Embosser Utility?
>>
>> Again relating to Networking, what operating system
is
your Server
>> running? Have you set up a
printer
> on
>> the server with the appropriate IP address?
>>
>> George.
>>
>>
>> ________________________________
>>
>> From: duxuser-bounce@xxxxxxxxxxxxx
>> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
Stephen
>> Schmucker
>> Sent: 25 November 2005 03:24
>> To: duxuser@xxxxxxxxxxxxx
>> Subject: [duxuser] Networking
>> Basic-d
>>
>>
>> Hi,
>>
>> Using Winxp pro, DBT 10.5, Index
>> Basic-d ver 3.21.
>>
>> I set up the ip port.
>>
>> In DBT, I told it to "write to
>> printer" beccause when I checked in "write to port"
the aforenamed
>> IP port doesn't show.
>>
>> Did this in Global and document.
>>
>> When I emboss, nothing happens.
>> When look in the print queue, it says it is sending
it
to
>> lpt1, thus the "nothing happening.
>>
>> How do I get the ip port and the
>> index associated?
>>
>> ________________________________
>>
>> No virus found in this
>> incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.362 / Virus Database:
>> 267.13.7/182 - Release Date: 11/24/2005
>>
>>
>> * * *
>> * This message is via list duxuser at freelists.org.
>> * To unsubscribe, send a blank message with
>> * unsubscribe
>> * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
You
> may also
>> * subscribe, unsubscribe, and set vacation mode and
other
> subscription
>> * options by visiting //www.freelists.org. The
list
> archive
>> * is also located there.
>> * Duxbury Systems' web site is
> http://www.duxburysystems.com
>> * * *
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.362 / Virus Database: 267.13.7/182 -
Release
> Date: 11/24/2005
>>
>>
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
You
may
> also
> * subscribe, unsubscribe, and set vacation mode and
other
> subscription
> * options by visiting //www.freelists.org. The
list
> archive
> * is also located there.
> * Duxbury Systems' web site is
http://www.duxburysystems.com
> * * *
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
You
may also
> * subscribe, unsubscribe, and set vacation mode and
other
subscription
> * options by visiting //www.freelists.org. The
list archive
> * is also located there.
> * Duxbury Systems' web site is
http://www.duxburysystems.com
> * * *
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.13.7/182 -
Release
Date: 11/24/2005
>
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>.
You
may also
* subscribe, unsubscribe, and set vacation mode and
other
subscription
* options by visiting //www.freelists.org. The
list
archive
* is also located there.
* Duxbury Systems' web site is
http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may also
* subscribe, unsubscribe, and set vacation mode and
other
subscription
* options by visiting //www.freelists.org. The
list
archive
* is also located there.
* Duxbury Systems' web site is
http://www.duxburysystems.com
* * *
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.8/183 -
Release
Date:
11/25/2005
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is
http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is
http://www.duxburysystems.com
* * *
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.8/183 - Release
Date:
11/25/2005
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is
http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is
http://www.duxburysystems.com
* * *
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.8/184 - Release
Date: 11/27/2005
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date: 12/9/2005
