[duxuser] Re: Networking Basic-d
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sun, 11 Dec 2005 23:32:27 -0000
Hi Stephen,
I think at this point, a call to Sighted would be your best
bet.
However, I will try to locate my network port information
when I get back to the office.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen
Schmucker
Sent: 11 December 2005 18:47
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Networking Basic-d
Hi George,
I've told the embosser to obtain an ip automatically. I
then had the embosser print the page. It came back with an
ip of 192.168.1.210. The subnet and gateway, and tftp were
all there as well.
I then proceeded to ping the beast and damn, if I didn't
finally get a positive response. Hoooray!
What is the next step?
And, thanks hugely for you patience and help.
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Sunday, November 27, 2005 4:02 AM
Subject: [duxuser] Re: Networking Basic-d
> Hi Stephen,
>
> Please don't keep me in suspense, especially on a Sunday
> morning before I've had breakfast! (Smile) Are you
working
> now, or at least making some progress?
>
> George.
>
> -----Original Message-----
> From: duxuser-bounce@xxxxxxxxxxxxx
> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen
> Schmucker
> Sent: 27 November 2005 02:52
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: Networking Basic-d
>
> Hi george,
>
> Yes, the utility does have an ip option and it does allow
> you to specify an ip.
>
> When I tried that, it said "transfer complete. Your
> suggestion of having to use a usb or parallel cable
answers
> the question as to why I kept getting no ip. Thanks
again.
> Much appreciated.
> ----- Original Message -----
> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
> To: <duxuser@xxxxxxxxxxxxx>
> Sent: Saturday, November 26, 2005 9:27 PM
> Subject: [duxuser] Re: Networking Basic-d
>
>
>> Hi Stephen,
>>
>> I'm at home right now, but as I recall, you can turn off
> the DNS/DHCP
>> function. I just can't recall if you do this via the
> Embosser's own
>> setup, or using the Embosser Utility.
>>
>> You'll need to use a parallel or USB cable, but the
> Utility has an IP
>> Address option in one of its two or three menus, so can I
> suggest you
>> look at the Embosser utility?
>>
>> George.
>>
>>
>>
>> -----Original Message-----
>> From: duxuser-bounce@xxxxxxxxxxxxx
>> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
Stephen
> Schmucker
>> Sent: 27 November 2005 02:06
>> To: duxuser@xxxxxxxxxxxxx
>> Subject: [duxuser] Re: Networking Basic-d
>>
>> Hi George,
>>
>> I tried pinging again after awhile and got request timed
> out again. I
>> checked on the index and the ip had reverted back to
> zeros.
>> ----- Original Message -----
>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>> To: <duxuser@xxxxxxxxxxxxx>
>> Sent: Saturday, November 26, 2005 7:37 AM
>> Subject: [duxuser] Re: Networking Basic-d
>>
>>
>>> Next thing I'd try Stephen, would be to connect the
>> embosser direct to
>>> your PC's network port, and try pinging the embosser
>> again. If it is
>>> OK, then it perhaps points to a router issue, which is a
>> whole other
>>> ball game.
>>>
>>> If it fails, then there are two possibilities. 1) The
>> network cable
>>> may be suspect, or perhaps crossover when it should be
>> straight
>>> through. Or 2) you need to change the IP address.
>>>
>>> George.
>>>
>>>> -----Original Message-----
>>>> From: duxuser-bounce@xxxxxxxxxxxxx
>>>> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
>> Stephen
>>> Schmucker
>>>> Sent: 26 November 2005 03:59
>>>> To: duxuser@xxxxxxxxxxxxx
>>>> Subject: [duxuser] Re: Networking Basic-d
>>>>
>>>> Hi George,
>>>>
>>>> Yes to both questions and I get a response back.
>>>> ----- Original Message -----
>>>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>>>> To: <duxuser@xxxxxxxxxxxxx>
>>>> Sent: Friday, November 25, 2005 5:26 PM
>>>> Subject: [duxuser] Re: Networking Basic-d
>>>>
>>>>
>>>> > Hi Stephen,
>>>> >
>>>> > O.K. the PC isn't seeing the embosser - obviously.
>>>> >
>>>> > Do you know the router's IP address, and can you ping
>>> that
>>>> > OK?
>>>> >
>>>> > George.
>>>> >
>>>> > -----Original Message-----
>>>> > From: duxuser-bounce@xxxxxxxxxxxxx
>>>> > [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
>>> Stephen
>>>> > Schmucker
>>>> > Sent: 25 November 2005 22:10
>>>> > To: duxuser@xxxxxxxxxxxxx
>>>> > Subject: [duxuser] Re: Networking Basic-d
>>>> >
>>>> > Hi George,
>>>> >
>>>> > I downloaded the embosser utility. When I pinged the
>>> IP, I
>>>> > got request timed out.
>>>> > ----- Original Message -----
>>>> > From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>>>> > To: <duxuser@xxxxxxxxxxxxx>
>>>> > Sent: Friday, November 25, 2005 12:41 PM
>>>> > Subject: [duxuser] Re: Networking Basic-d
>>>> >
>>>> >
>>>> >> Hi Stephen,
>>>> >>
>>>> >> You can download the Index Embosser Utility from
>>>> >> http://www.braille.se Click on the "Support" link,
>>> and
>>>> >> then on the "Download Software" link. On that page
> is
>>> an
>>>> > "Embosser
>>>> >> Utility" link which expands. You want "english
>> version
>>>> > 2.17.5". Be
>>>> >> VERY careful how you use this program, as you can
>>>> > potentially wipe the
>>>> >> embosser firmware out if you are not careful.
>>>> >>
>>>> >> If you are in North America, you would probably be
>> best
>>>> > calling
>>>> >> Sighted Electronics who are the main dealers for the
>>>> > region. Tel:
>>>> >> 1-800-666-4883. They're on holiday right now, but
>> I'll
>>> do
>>>> > what I can
>>>> >> here.
>>>> >>
>>>> >> The first test I would be inclined to do is a
"ping".
>>>> > This will tell
>>>> >> you if your system sees the Index regardless of what
>>>> > drivers, etc.,
>>>> >> are installed. To do this, click on Start, Run, and
>>> then
>>>> > type cmd and
>>>> >> press enter.
>>>> >>
>>>> >> You should then be at what is essentially a DOS
>> prompt.
>>>> > Now
>>>> >> type:-
>>>> >>
>>>> >> Ping 192.168.1.203
>>>> >>
>>>> >> And press enter.
>>>> >>
>>>> >> You will know from the response whether or not your
>>> system
>>>> > has
>>>> >> correctly pinged the embosser.
>>>> >>
>>>> >> Let me know how you get on, and we'll take it from
>>> there.
>>>> >>
>>>> >> (Please bear in mind that I'm in the U.K. and 5
hours
>>>> > ahead of EST so
>>>> >> may not get back to you by return.)
>>>> >>
>>>> >> George.
>>>> >>
>>>> >>
>>>> >> ________________________________
>>>> >>
>>>> >> From: duxuser-bounce@xxxxxxxxxxxxx
>>>> >> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
>>> Stephen
>>>> > Schmucker
>>>> >> Sent: 25 November 2005 15:48
>>>> >> To: duxuser@xxxxxxxxxxxxx
>>>> >> Subject: [duxuser] Re: Networking Basic-d
>>>> >>
>>>> >>
>>>> >> Hi George,
>>>> >>
>>>> >> I have the Index connected with its RJ45 connector
to
>> a router.
>>>> >>
>>>> >> When I did he he no buttons on the embosser, it gave
>> me an IP of
>>>> >> 192.168.1.203.
>>>> >>
>>>> >> I don't seem to have the embosser utility. Where
can
>> I download
>>>> >> it?
>>>> >>
>>>> >> I am running WinXP SP2.
>>>> >>
>>>> >> I set up the printer on the computer and gave it the
>> above IP.
>>>> >>
>>>> >> Thanks for your patience and help.
>>>> >>
>>>> >> ----- Original Message -----
>>>> >> From: George Bell
>>>> >> <mailto:george@xxxxxxxxxxxxxxxxxxx>
>>>> >> To: duxuser@xxxxxxxxxxxxx
>>>> >> Sent: Friday, November 25, 2005 5:43 AM
>>>> >> Subject: [duxuser] Re: Networking Basic-d
>>>> >>
>>>> >>
>>>> >> Hi Stephen,
>>>> >>
>>>> >> I'm afraid I'll need a little more information.
>>>> >>
>>>> >> How exactly do you have the Index connected?
>>>> >> Are you using it's RJ45 network connection? If so,
>>> have
>>>> > you
>>>> >> given the actual embosser itself an IP address using
>>> the
>>>> >> Index Embosser Utility?
>>>> >>
>>>> >> Again relating to Networking, what operating system
> is
>> your Server
>>>> >> running? Have you set up a
>>> printer
>>>> > on
>>>> >> the server with the appropriate IP address?
>>>> >>
>>>> >> George.
>>>> >>
>>>> >>
>>>> >> ________________________________
>>>> >>
>>>> >> From: duxuser-bounce@xxxxxxxxxxxxx
>>>> >> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
>>> Stephen
>>>> >> Schmucker
>>>> >> Sent: 25 November 2005 03:24
>>>> >> To: duxuser@xxxxxxxxxxxxx
>>>> >> Subject: [duxuser] Networking
>>>> >> Basic-d
>>>> >>
>>>> >>
>>>> >> Hi,
>>>> >>
>>>> >> Using Winxp pro, DBT 10.5, Index
>>>> >> Basic-d ver 3.21.
>>>> >>
>>>> >> I set up the ip port.
>>>> >>
>>>> >> In DBT, I told it to "write to
>>>> >> printer" beccause when I checked in "write to port"
>> the aforenamed
>>>> >> IP port doesn't show.
>>>> >>
>>>> >> Did this in Global and document.
>>>> >>
>>>> >> When I emboss, nothing happens.
>>>> >> When look in the print queue, it says it is sending
> it
>>> to
>>>> >> lpt1, thus the "nothing happening.
>>>> >>
>>>> >> How do I get the ip port and the
>>>> >> index associated?
>>>> >>
>>>> >> ________________________________
>>>> >>
>>>> >> No virus found in this
>>>> >> incoming message.
>>>> >> Checked by AVG Free Edition.
>>>> >> Version: 7.1.362 / Virus Database:
>>>> >> 267.13.7/182 - Release Date: 11/24/2005
>>>> >>
>>>> >>
>>>> >> * * *
>>>> >> * This message is via list duxuser at freelists.org.
>>>> >> * To unsubscribe, send a blank message with
>>>> >> * unsubscribe
>>>> >> * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
>>> You
>>>> > may also
>>>> >> * subscribe, unsubscribe, and set vacation mode and
>>> other
>>>> > subscription
>>>> >> * options by visiting //www.freelists.org. The
>>> list
>>>> > archive
>>>> >> * is also located there.
>>>> >> * Duxbury Systems' web site is
>>>> > http://www.duxburysystems.com
>>>> >> * * *
>>>> >>
>>>> >>
>>>> >> --
>>>> >> No virus found in this incoming message.
>>>> >> Checked by AVG Free Edition.
>>>> >> Version: 7.1.362 / Virus Database: 267.13.7/182 -
>>> Release
>>>> > Date: 11/24/2005
>>>> >>
>>>> >>
>>>> >
>>>> > * * *
>>>> > * This message is via list duxuser at freelists.org.
>>>> > * To unsubscribe, send a blank message with
>>>> > * unsubscribe
>>>> > * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
>> You
>>> may
>>>> > also
>>>> > * subscribe, unsubscribe, and set vacation mode and
>>> other
>>>> > subscription
>>>> > * options by visiting //www.freelists.org. The
>>> list
>>>> > archive
>>>> > * is also located there.
>>>> > * Duxbury Systems' web site is
>>> http://www.duxburysystems.com
>>>> > * * *
>>>> > * * *
>>>> > * This message is via list duxuser at freelists.org.
>>>> > * To unsubscribe, send a blank message with
>>>> > * unsubscribe
>>>> > * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
>> You
>>> may also
>>>> > * subscribe, unsubscribe, and set vacation mode and
>>> other
>>>> subscription
>>>> > * options by visiting //www.freelists.org. The
>>> list archive
>>>> > * is also located there.
>>>> > * Duxbury Systems' web site is
>>> http://www.duxburysystems.com
>>>> > * * *
>>>> >
>>>> >
>>>> > --
>>>> > No virus found in this incoming message.
>>>> > Checked by AVG Free Edition.
>>>> > Version: 7.1.362 / Virus Database: 267.13.7/182 -
>>> Release
>>>> Date: 11/24/2005
>>>> >
>>>>
>>>> * * *
>>>> * This message is via list duxuser at freelists.org.
>>>> * To unsubscribe, send a blank message with
>>>> * unsubscribe
>>>> * as the subject to <duxuser-request@xxxxxxxxxxxxx>.
You
>>> may also
>>>> * subscribe, unsubscribe, and set vacation mode and
> other
>>> subscription
>>>> * options by visiting //www.freelists.org. The
> list
>>> archive
>>>> * is also located there.
>>>> * Duxbury Systems' web site is
>>> http://www.duxburysystems.com
>>>> * * *
>>>>
>>> * * *
>>> * This message is via list duxuser at freelists.org.
>>> * To unsubscribe, send a blank message with
>>> * unsubscribe
>>> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
>> may also
>>> * subscribe, unsubscribe, and set vacation mode and
other
>> subscription
>>> * options by visiting //www.freelists.org. The
list
>> archive
>>> * is also located there.
>>> * Duxbury Systems' web site is
>> http://www.duxburysystems.com
>>> * * *
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.362 / Virus Database: 267.13.8/183 -
Release
>> Date:
>>> 11/25/2005
>>>
>>
>> * * *
>> * This message is via list duxuser at freelists.org.
>> * To unsubscribe, send a blank message with
>> * unsubscribe
>> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
> may also
>> * subscribe, unsubscribe, and set vacation mode and other
> subscription
>> * options by visiting //www.freelists.org. The list
> archive
>> * is also located there.
>> * Duxbury Systems' web site is
> http://www.duxburysystems.com
>> * * *
>> * * *
>> * This message is via list duxuser at freelists.org.
>> * To unsubscribe, send a blank message with
>> * unsubscribe
>> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
> may also
>> * subscribe, unsubscribe, and set vacation mode and other
> subscription
>> * options by visiting //www.freelists.org. The list
> archive
>> * is also located there.
>> * Duxbury Systems' web site is
> http://www.duxburysystems.com
>> * * *
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.362 / Virus Database: 267.13.8/183 - Release
> Date:
>> 11/25/2005
>>
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may
> also
> * subscribe, unsubscribe, and set vacation mode and other
> subscription
> * options by visiting //www.freelists.org. The list
> archive
> * is also located there.
> * Duxbury Systems' web site is
http://www.duxburysystems.com
> * * *
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You
may also
> * subscribe, unsubscribe, and set vacation mode and other
subscription
> * options by visiting //www.freelists.org. The list
archive
> * is also located there.
> * Duxbury Systems' web site is
http://www.duxburysystems.com
> * * *
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.13.8/184 - Release
Date: 11/27/2005
>
>
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
