[duxuser] Re: Printing call cards with print and Braille using duxbury
- From: "Brett Winches" <bwinches@xxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Fri, 11 Jul 2008 14:58:00 -0600
this may be possible with the TIGER PRO and some other embossers. I
have heard that some will do this but do not recall just now.
Contact me off list if you need further help.
Merci!
Brett Winchester KD7JN
bwinchester@xxxxxxxxxxxxxxx
208.639.8386
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
On Behalf Of Francis E. Khan
Sent: Tuesday, June 24, 2008 12:27 PM
To: Duxuser
Subject: [duxuser] Printing call cards with print and Braille using
duxbury
I have received a request about making call cards with both print and
Brailleand would like advice on doing this. For example, where can I
access continuous card stock to print two cards across and 7 or 8 down.
To do the inkprint part of the process will probably mean using a dot
matrix printer but is there a facility in DBT to braille each card?
Alternatively, is there a company in the USA where this can be done at a
reasonable cost?
Another alternative is to have some sort of seal so that when it is
placed over a card and depressed the Braille will be reproduced. Thanks
in advance for your suggestions.
Francis Khan
Other related posts:
